✦ LIBER ✦

Simulation of Capacity Expansion and Sequencing Alternatives for a Sheet Metal Producer

✍ Scribed by M. M. Arer and N. E. Ozdemirel

Book ID: 124850042
Publisher: Palgrave Publishers Ltd.
Year: 1999
Tongue: English
Weight: 419 KB
Volume: 50
Category: Article
ISSN: 0160-5682
DOI: 10.2307/3010616

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Simulation Methods of a System Dynamics

Simulation Methods of a System Dynamics Model for Efficient Operations and Planning of Capacity Expansion of Activated-sludge Wastewater Treatment Plants

✍ Park, S.; Kim, B.-J.; Jung, S.-Y. 📂 Article 📅 2014 🏛 Elsevier 🌐 English ⚖ 276 KB

Use of pilger-type cold-reduction mills

Use of pilger-type cold-reduction mills in a casting-rolling complex for producing sheet and strip of nonferrous metals and alloys

✍ Yu. S. Shevakin; Yu. N. Raikov; A. V. Bushev; V. M. Bakanov 📂 Article 📅 1999 🏛 Springer US 🌐 English ⚖ 433 KB

Principle and Simulation of Fixture Conf

Principle and Simulation of Fixture Configuration Design for Sheet Metal Assembly with Laser Welding, Part 1: Finite-Element Modelling and a Prediction and Correction Method

✍ B. Li; B.W. Shiu; K.J. Lau 📂 Article 📅 2001 🏛 Springer 🌐 English ⚖ 210 KB

Monte Carlo simulations for the interact

Monte Carlo simulations for the interactions of metal complexes with the silicate sheets of a clay: comparison of binding states between tris(1,10-phenanthroline)metal(II) and tris(2,2'-bipyridyl)metal(II) chelates

✍ Sato, Hisako; Yamagishi, Akihiko; Kato, Shigeki 📂 Article 📅 1992 🏛 American Chemical Society 🌐 English ⚖ 908 KB

Consideration of fundamental influence p

Consideration of fundamental influence parameters for the simulation of sheet-metal forming processes by means of plastic melt pressure. Berücksichtigung wesentlicher Einflussparameter in der Blechumformsimulation mittels Kunststoffschmelzedruck

✍ B.-A. Behrens; A. Bouguecha; T. Götze 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 801 KB

## Abstract A numerical simulation of an active media based forming process has been carried out by means of the finite element method, where molten plastic was used as pressure medium. The material behaviour of the sheet metal component has been modelled in the FEA package Ls‐Dyna with a temperatu

[AIP MATERIALS PROCESSING AND DESIGN; Mo

[AIP MATERIALS PROCESSING AND DESIGN; Modeling, Simulation and Applications; NUMIFORM '07; Proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes - Porto (Portugal) (17-21 June 2007)] AIP Conference Proceedings - CrachFEM — A Comprehensive Approach For The Prediction Of Sheet Metal Failure

✍ Dell, Harry; Gese, Helmut; Oberhofer, Gernot 📂 Article 📅 2007 🏛 AIP ⚖ 1020 KB