Simple sample transfer technique by internally expanded desorptive flow for needle trap devices
✍ Scribed by In-Yong Eom; Janusz Pawliszyn
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 499 KB
- Volume
- 31
- Category
- Article
- ISSN
- 1615-9306
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Needle trap devices (NTDs) are improving in simplicity and usefulness for sampling volatile organic compounds (VOCs) since their first introduction in early 2000s. Three different sample transfer methods have been reported for NTDs to date. All methods use thermal desorption and simultaneously provide desorptive flow to transfer desorbed VOCs into a GC separation column. For NTDs having ‘side holes’, GC carrier gas enters a ‘side hole’ and passes through sorbent particles to carry desorbed VOCs, while for NTD not having a ‘side hole’, clean air as desorptive flow can be provided through a needle head by a air tight syringe to sweep out desorbed VOCs or water vapor has been reported recently to be used as desorptive flow. We report here a new simple sample transfer technique for NTDs, in which no side holes and an external desorptive flow are required. When an NTD enriched by a mixture of benzene, toluene, ethylbenzene, and xylene (BTEX) or n‐alkane mixture (C6–C15) is exposed to the hot zone of GC injector, the expanding air above the packed sorbent transfers the desorbed compounds from the sorbent to the GC column. This internal air expansion results in clean and sharp desorption profiles for BTEX and n‐alkane mixture with no carryover. The effect of desorption temperature, desorption time, and overhead volumes was studied. Decane having vapor pressure of ∼︁1 Torr at 20°C showed ∼︁1% carryover at the moderate thermal desorption condition (0.5 min at 250°C).