## Abstract For Abstract see ChemInform Abstract in Full Text.
Shape memory effect and magnetostriction in polycrystalline Ni–Mn–Ga thin film microactuators
✍ Scribed by M. Kohl; A. Agarwal; V.A. Chernenko; M. Ohtsuka; K. Seemann
- Publisher
- Elsevier Science
- Year
- 2006
- Tongue
- English
- Weight
- 296 KB
- Volume
- 438-440
- Category
- Article
- ISSN
- 0921-5093
No coin nor oath required. For personal study only.
✦ Synopsis
Ni-Mn-Ga cantilever and tensile microactuators are investigated with respect to their thermoelastic and magnetomechanical characteristics. The base materials are either single-layer Ni-Mn-Ga thin films or Ni-Mn-Ga/Mo thin film composites with different compositions and thicknesses up to 10 m, which have been fabricated by magnetron sputtering. Differential scanning calorimetry measurements of the thin films show the characteristic features of ferromagnetic Heusler alloys exhibiting a martensitic transformation and a ferromagnetic transition well above room temperature. A pronounced temperature-induced shape memory effect is observed in deflection measurements of the microactuators. The maximum recoverable strain is about 0.8%. Magnetostriction measurements of cantilever actuators consisting of Ni-Mn-Ga/Mo thin film composites show a large increase of magnetostrain for decreasing Ni-Mn-Ga film thickness in the submicrometer range.
📜 SIMILAR VOLUMES
## Abstract Thin film nitinol and single crystal Ni‐Mn‐Ga represent two new shape memory materials with potential to be used as percutaneously placed implant devices. However, the biocompatibility of these materials has not been adequately assessed. Immersion tests were conducted on both thin film
A perfect two-way shape memory effect (TWSME) with reversible strain of about 9% has been found in the high-temperature Ni 57.5 Mn 22.5 Ga 20.0 single crystal transforming into 2M non-modulated martensitic phase. Two thermal/mechanical treatment routes were utilized in the experimental procedures. T
## Abstract The off‐stoichiometric Ni~2~MnGa Heusler alloy is a magnetic shape‐memory alloy capable of reversible magnetic‐field‐induced strains (MFIS). These are generated by twin boundaries moving under the influence of an internal stress produced by a magnetic field through the magnetocrystallin