✦ LIBER ✦

Sensors and Actuators for Microreaction Systems

✍ Scribed by F. Schael; W. Ehrfeld; J. Kojouharova; D. Lin; C. Peter; K.-P. Schelhaas

Publisher: John Wiley and Sons
Year: 2003
Tongue: German
Weight: 98 KB
Volume: 75
Category: Article
ISSN: 0009-286X
DOI: 10.1002/cite.200390431

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

MODAL ACTUATORS AND SENSORS

✍ W. GAWRONSKI 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 180 KB

MODAL ACTUATORS AND SENSORS

✍ W. GAWRONSKI 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 180 KB

SENSOR AND ACTUATOR PLACEMENT FOR MODAL

SENSOR AND ACTUATOR PLACEMENT FOR MODAL IDENTIFICATION

✍ Y.-T. Shih; A.C. Lee; J.-H. Chen 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 283 KB

In modal identification, the use of different actuator and sensor locations results in different frequency response functions (FRFs) and consequently affects the modes shown on the FRF plots. This paper presents a method of placing sensors and actuators to obtain reliable measured data for estimatin

SIMULTANEOUS PLACEMENT OF ACTUATORS AND

SIMULTANEOUS PLACEMENT OF ACTUATORS AND SENSORS

✍ W. GAWRONSKI 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 491 KB

ROBUST H∞VIBRATION CONTROL FOR FLEXIBLE

ROBUST H∞VIBRATION CONTROL FOR FLEXIBLE LINKAGE MECHANISM SYSTEMS WITH PIEZOELECTRIC SENSORS AND ACTUATORS

✍ X. ZHANG; C. SHAO; S. LI; D. XU; A.G. ERDMAN 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 304 KB

It is well known that the unmodelled dynamics may deteriorate the e$ciency of a controller if the controller is not robust enough. This paper presents a robust H vibration control method for high-speed #exible linkage mechanism systems with piezoelectric actuators and sensors. The robust H controlle

ACTUATOR AND SENSOR PLACEMENT FOR STRUCT

ACTUATOR AND SENSOR PLACEMENT FOR STRUCTURAL TESTING AND CONTROL

✍ W. Gawronski 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 180 KB

In this paper, the actuator and sensor locations of a structural test item are selected as a replacement of the disturbance inputs and the performance outputs of a real structure. The most straightforward approach is to place sensors in the areas of performance evaluation, and actuators in the areas