Sealing gasket

Conductive/ sealing gasket

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 118 KB

## Patents fuid, or dissolve partially in certain fluids and lose weight. An average percentage weight change is calculated across nine test samples.

Composite sealing gasket

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 236 KB

the bearing. This circumferentially uniform fluid pressure, by itself, or in combination with a flexible lip (44), prevents contaminant ingress between the rotating shaft and the end-cap of the bearing housing. The structure (15) that creates the tangential fluid-flow is part of the removable cartri

Spark plug gasket sealing

📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 364 KB

but they can also be oriented to provide an unequal distribution of pressure across the segment if this is desired. The end seal is preferably constructed with a plane of symmetry such that the end seal is reversible, and can be used in either side of a conventional splice case. Figure 1 shows a ca

Plastic pipe sealing gasket

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 218 KB

tain close alignment with the shaft. A series of these shoes circumferentially make up the entire seal. There is a secondary seal to prevent leakage around the outside of the shoe, past the spring.

Sealing structure and gasket

📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 140 KB

## Manufacture Generale de Joints, France A heat-sealable seal for the mouth of a vessel is described. It includes a substrate made of an expanded polyester layer, connected by adhesive to a lid that includes an aluminium foil and a heat-sealable film. The aluminium foil and the film are connected

Sealing structure using gasket

📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 195 KB