✦ LIBER ✦

Scattering of the fundamental torsional mode at an axial crack in a pipe

✍ Scribed by Ratassepp, M.; Fletcher, S.; Lowe, M. J. S.

Book ID: 121255852
Publisher: American Institute of Physics
Year: 2010
Tongue: English
Weight: 996 KB
Volume: 127
Category: Article
ISSN: 0001-4966
DOI: 10.1121/1.3277185

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

THE FRACTURE BEHAVIOUR OF AN AXIAL CRACK

THE FRACTURE BEHAVIOUR OF AN AXIAL CRACK IN A PRESSURISED PIPE

✍ B. K. Neale; A. B. Haines; A. G. Miller 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 658 KB

Short range scattering of the fundamenta

Short range scattering of the fundamental shear horizontal guided wave mode normally incident at a through-thickness crack in an isotropic plate

✍ Rajagopal, P.; Lowe, M. J. S. 📂 Article 📅 2007 🏛 American Institute of Physics 🌐 English ⚖ 774 KB

Calculating the pressure of ductile fail

Calculating the pressure of ductile failure of a pipe with an axial through crack

✍ I. V. Orynyak 📂 Article 📅 1993 🏛 Springer 🌐 English ⚖ 649 KB

The effect of an axial compressive load

The effect of an axial compressive load on the stability of a circumferential crack in a stainless steel pipe that is built-in at both ends

✍ E. Smith 📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 637 KB

Detection of axial crack in the bend reg

Detection of axial crack in the bend region of a pipe by high frequency electromagnetic waves

✍ Kavoos Abbasi; Nasrin Hosseini Motlagh; Mohammad Reza Neamatollahi; Hidetoshi Ha 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 476 KB

Stress intensity factors for long axial

Stress intensity factors for long axial surface cracks at the outer wall of a pipe loaded by stress gradients

✍ H. Grebner 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 297 KB 👁 1 views

By means of the finite element method crack opening displacements were calculated for long axial surface cracks at the outer wall of a pipe. The wall thickness to inner radius ratio of the pipe was 1 to 10. Following a procedure introduced be Mattheck et al. weight functions were evaluated by means