SAXS and WAXS investigation of polyamide-6 modified with methacrylic acid
✍ Scribed by St. Rabiej; A. Włochowicz; J. Janicki; M. Bryjak
- Publisher
- John Wiley and Sons
- Year
- 1986
- Tongue
- English
- Weight
- 347 KB
- Volume
- 37
- Category
- Article
- ISSN
- 0323-7648
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract Ethylene/methacrylic acid copolymer Surlyn® 9020 (SU) was used to reduce the crystallinity of polyamide 6 (PA6). Differential scanning calorimetry was used to calculate the change in crystallinity of a modified polymer: four cases of SU weight fractions (5, 15, 20, and 30%) were conside
On the basis of combination of wide-angle and small-angle X-ray scattering, the character of the polypropylene crystalline phase and its content were studied in polypropylene-high impact polystyrene blends, compatibilized by styrene-butadiene block copolymers. Addition of a copolymer slightly reduce
## Abstract Blends of polyamide 6 with low‐density polyethylene compatibilized with sodium‐, zinc‐, and lithium‐neutralized ethylene—methacrylic acid ionomers were investigated at 11, 33, and 55 wt % neutralization of the ionomers. Blends of polyamide 6 with low‐density polyethylene without a compa
## Abstract The melting and recrystallization of yarns of polyamide 6 spun at different take‐up velocities ranging from 3 500 to 5 600 m/min was investigated by means of wide‐angle X‐ray scattering (WAXS) employing synchrotron radiation and by differential scanning calorimetry (DSC). It was shown t