✦ LIBER ✦

Safety and reliability considerations for lithium batteries

✍ Scribed by Samuel C. Levy

Book ID: 108454614
Publisher: Elsevier Science
Year: 1997
Tongue: English
Weight: 283 KB
Volume: 68
Category: Article
ISSN: 0378-7753
DOI: 10.1016/s0378-7753(96)02622-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Safety considerations for fabricating li

Safety considerations for fabricating lithium battery packs

✍ James J. Ciesla 📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 408 KB

Packagmg of relatively high-rate, spirally wound (large surface area) sulfur oxychlonde cell systems, such as Li/thionyl or sulfuryl chloride is discussed. Prior to deslgnmg a battery pack, a review of the characterization studies for the cells should be conducted. The approach to fabricating a batt

Safety and reliability studies of primar

Safety and reliability studies of primary lithium batteries

✍ Samuel C. Levy 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 346 KB

Analysis of safety and reliability in se

Analysis of safety and reliability in secondary lithium batteries

✍ D. Fouchard; L. Lechner 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 576 KB

General safety considerations for high p

General safety considerations for high power Li/SOCl2 batteries

✍ Qiu Lin; Tan Yixiong; Qiu Ruizhen; Zhang Zuomin; Du Youliang; Wang Jigiang 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 413 KB

Contributions of heat generation and heat management to the internal temperature profile of the Li/SOCI2 cell have been analysed based on thermal modelling. Some approaches are proposed, checked and used in high power Li/SOCI2 cells and batteries, showing improvements in their safety and performance

Performance and reliability of the lithi

Performance and reliability of the lithium/iodine battery

✍ C.C. Liang; C.F. Holmes 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 729 KB

The lithium/iodine -polyvinylpyridine battery, used as a power source in cardiac pacemakers, is discussed. Because of the critical nature of the use of this cell, rather stringent reliability and quality assurance procedures are carried out during design, manufacturing, and testing of these cells. T

Reproducibility and reliability of recha

Reproducibility and reliability of rechargeable lithium/molybdenum disulfide batteries

✍ K. Brandt; F.C. Laman 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 792 KB

Groups of rechargeable lithium/molybdenum disulfide cells fabricated in Moli Energy Limited's pilot plant facilities have been subjected to cycle tests and charge retention tests to assess cell reproducibility and reliability. The results show excellent reproducibility as far as discharge capacity a