✦ LIBER ✦

Room temperature preparation of conductive silver features using spin-coating and inkjet printing

✍ Scribed by Valeton, Josué J. P. ;Hermans, Ko ;Bastiaansen, Cees W. M. ;Broer, Dirk J. ;Perelaer, Jolke ;Schubert, Ulrich S. ;Crawford, Gregory P. ;Smith, Patrick J.

Book ID: 121324881
Publisher: Royal Society of Chemistry
Year: 2010
Tongue: English
Weight: 335 KB
Volume: 20
Category: Article
ISSN: 0959-9428
DOI: 10.1039/B917266A

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Roll-to-Roll Compatible Sintering of Ink

Roll-to-Roll Compatible Sintering of Inkjet Printed Features by Photonic and Microwave Exposure: From Non-Conductive Ink to 40% Bulk Silver Conductivity in Less Than 15 Seconds

✍ Jolke Perelaer; Robert Abbel; Sebastian Wünscher; Robin Jani; Tim van Lammeren; 📂 Article 📅 2012 🏛 John Wiley and Sons 🌐 English ⚖ 597 KB

A Low Curing Temperature Silver Ink for

A Low Curing Temperature Silver Ink for Use in Ink-Jet Printing and Subsequent Production of Conductive Tracks

✍ Angela L. Dearden; Patrick J. Smith; Dong-Youn Shin; Nuno Reis; Brian Derby; Pau 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 156 KB

## Abstract **Summary:** A drop‐on‐demand ink‐jet printer has been used to print a silver‐organic solution onto glass substrates. Conductive silver tracks were obtained by heat treatment of the ink‐jet printed deposits at temperatures ranging from 125 °C–200 °C in air. Resistivity values were found