𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Robotic fiber placement process analysis and optimization using response surface method

✍ Scribed by Tauseef Aized; Bijan Shirinzadeh

Book ID
105854097
Publisher
Springer
Year
2010
Tongue
English
Weight
490 KB
Volume
55
Category
Article
ISSN
0268-3768

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Process Optimization and Empirical Model
Process Optimization and Empirical Modeling for Electrospun Poly(D,L-lactide) Fibers using Response Surface Methodology
✍ Shu-Ying Gu; Jie Ren πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 292 KB

## Abstract **Summary:** Ultrafine fibers were spun from poly(D,L‐lactide) (PDLA) solution using a homemade electrospinning set‐up. Fibers with diameter ranging from 350 to 1 900 nm were obtained. Morphologies of fibers and distribution of fiber diameters were investigated varying concentration and

Parameters optimization of a nano-partic
Parameters optimization of a nano-particle wet milling process using the Taguchi method, response surface method and genetic algorithm
✍ Tung-Hsu Hou; Chi-Hung Su; Wang-Lin Liu πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 759 KB

Nano-particles have been successfully and widely applied in many industrial applications. The wet-type mechanical milling process is a popular method used to produce nano-particles. Therefore, it is very important to improve milling process capability and quality by setting the optimal milling param