✦ LIBER ✦

Rheology modification of PVC plastisols with poly(butylene terephthalate)-b-poly(tetramethylene glycol)

✍ Scribed by Xia Wang; Yunzhao Yu

Publisher: John Wiley and Sons
Year: 1997
Tongue: English
Weight: 136 KB
Volume: 66
Category: Article
ISSN: 0021-8995
DOI: 10.1002/(sici)1097-4628(19971024)66:4<749::aid-app15>3.0.co;2-m

No coin nor oath required. For personal study only.

✦ Synopsis

A few percent of poly(butylene)-b-poly(tetramethylene glycol) was able to turn a liquid plasticizer into a gel, and thus imparted yield stresses to the fluid. When the plasticizer contained as little as 2.5 wt % of the block copolymer, sag free plastisols were obtained. A reduction in tensile strength was found for the modified plastisols, while the elongation was not affected.

📜 SIMILAR VOLUMES

Synthesis and characterization of poly[(

Synthesis and characterization of poly[(butylene succinate)-co-(butylene terephthalate)]-b-poly(tetramethylene glycol) segmented block copolymer

✍ Young H. Park; Chang G. Cho 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 198 KB 👁 1 views

Biodegradability of Poly(ethylene tereph

Biodegradability of Poly(ethylene terephthalate) Copolymers with Poly(ethylene glycol)s and Poly(tetramethylene glycol)

✍ Nagata, Minoru; Kiyotsukuri, Tsuyoshi; Minami, Susumu; Tsutsumi, Naoto; Sakai, W 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 400 KB 👁 2 views

Poly(ethy1ene terephthalate) copolymers were prepared by melt polycondensation of dimethyl terephthalate and excess ethylene glycol with 10- 40 mol% (in feed) of poly(ethy1ene glycol) (E) and poly(tetramethy1ene glycol) (B), with molecular weight (MW) of E and B 200-7500 and 1000, respectively. The

Long-term investigation on hydrolytic de

Long-term investigation on hydrolytic degradation and morphology of poly(ethylene glycol terephthalate)-b-poly(butylene terephthalate) copolymer films

✍ Aiying Zhang; Zengguo Feng; Zhiguo Xie 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 376 KB

Surface modification of poly(ethylene te

Surface modification of poly(ethylene terephthalate) film by coating with poly(ethylene glycol)-grafted polystyrene

✍ Fusako Seto; Akio Kishida; Yoichiro Muraoka; Mitsuru Akashi 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 161 KB 👁 2 views

The poly(ethylene glycol) (PEG)-grafted styrene (St) copolymer, which was formed as a nanosphere, was used as an agent to modify the surface of poly(ethylene terephthalate) (PET) film. The graft copolymer was dissolved into chloroform and coated onto the PET film by dip-coating method. The coated am

Mechanical properties of thermoplastic e

Mechanical properties of thermoplastic elastomers of poly(butylene terephthalate) and poly(ethylene glycol) in a bending deformation

✍ Shuhong Wang; J. E. Mark; B. Erman; S. Fakirov 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 381 KB

Thermoplastic elastomers based on poly (butylene terephthalate) (PBT) and poly (ethylene glycol) (PEG) were studied by bending-creep measurements. The dependence of the creep compliance on the composition of the block copolymer was determined, and the experimental results were compared with calculat

Surface modification of poly(ethylene te

Surface modification of poly(ethylene terephthalate) angioplasty balloons with a hydrophilic poly(acrylamide-co-ethylene glycol) interpenetrating polymer network coating

✍ Park, S. ;Bearinger, J. P. ;Lautenschlager, E. P. ;Castner, D. G. ;Healy, K. E. 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 163 KB 👁 2 views