✦ LIBER ✦

Rheological studies of the polymerization of elastomeric impression materials. II. Viscosity measurements

✍ Scribed by Cook, Wayne D.

Publisher: John Wiley and Sons
Year: 1982
Tongue: English
Weight: 719 KB
Volume: 16
Category: Article
ISSN: 0021-9304
DOI: 10.1002/jbm.820160403

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

As part of a detailed study of the curing of a range of dental elastomeric impression materials, a cone and plate rheometer was used to measure the variation in viscosity due to chain growth. The dependence of this behavior on the catalyst/base ratio, retarding and accelerating agents, and alternative initiators was studied and rationalized in terms of the polymerization chemistry investigated previously. Limited success was achieved with the quantitative interpretation of this data in terms of the polymerization kinetics. Of clinical relevance, only the viscosity behavior of the imine‐terminated polyether and one of the thiol‐terminated polysulfides approached that of an ideal impression material.

📜 SIMILAR VOLUMES

Rheological studies of the polymerizatio

Rheological studies of the polymerization of elastomeric impression materials. III. Dynamic stress relaxation modulus

✍ Cook, Wayne D. 📂 Article 📅 1982 🏛 John Wiley and Sons 🌐 English ⚖ 640 KB

## Abstract As part of a detailed study of the curing of a range of dental elastomeric impression materials, the 10‐s stress relaxation modulus was measured as a function of the curing time. The influence of the catalyst/base ratio was also investigated and compared with the pregel viscosity previo

Rheological studies of the polymerizatio

Rheological studies of the polymerization of elastomeric impression materials. I. Network structure of the set state

✍ Cook, Wayne D. 📂 Article 📅 1982 🏛 John Wiley and Sons 🌐 English ⚖ 850 KB

## Abstract As part of the detailed study of the curing of a range of dental elastomeric impression materials, their chemistry was investigated. This information, the dependence of the stress relaxation modulus of the set material on the catalyst/base ratios, and the level of diluent were used to e

New coating materials prepared by radiat

New coating materials prepared by radiation-induced polymerization. II. Study on the polymerization mechanism of mar-resistant coating composition

✍ M. Yoshida; H. Okubo; I. Kaetsu 📂 Article 📅 1978 🏛 John Wiley and Sons 🌐 English ⚖ 500 KB 👁 2 views

It was previously reported that excellent mar resistance coating systems could be obtained by the combination of silicone compounds and vinyl compounds, such as KBM 403-GMA systems. Radiation-induced polymerization was the most efficient means of prepolymerization to give the viscosity suitable for

A Study of the Measurement of Surface an

A Study of the Measurement of Surface and Interfacial Tension by the Maximum Liquid Drop Volume Method: II. Viscosity Effect on the Tension Measurement

✍ Bingyin Pu; Donghao Chen 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 66 KB 👁 1 views

The maximum liquid drop volume (v(max)) is measured by using a back-suction micrometer syringe piston technique. Different very viscous liquids are measured by (v(max)) and (v(f)) methods to observe the effect of viscosity on tension measurement. No apparent viscosity effect was observed in surface

Studies of converging flows of viscoelas

Studies of converging flows of viscoelastic polymeric melts. II. Velocity measurements in the entrance region of a sharp-edged slit die

✍ Leonard H. Drexler; Chang Dae Han 📂 Article 📅 1973 🏛 John Wiley and Sons 🌐 English ⚖ 1006 KB