This work is a complete and comprehensive study of the rheological properties of carboxymethyl cellulose (CMC) solutions. The study was carried out using the computer controlled RheoStress RS100 system of Haake. CMC concentration in the test solutions ranged by weight from 1 to 5%. This range was su
Rheological properties of high concentrations of carboxymethyl cellulose solutions
โ Scribed by Mohamed Edali; M. Nabil Esmail; Goergios H. Vatistas
- Publisher
- John Wiley and Sons
- Year
- 2001
- Tongue
- English
- Weight
- 261 KB
- Volume
- 79
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
## Abstract Paper sheets prepared from bleached bagasse and paper grade wood pulp were impregnated in a carboxymethyl cellulose solution. After drying the prepared samples were cured at 100ยฐC or 140ยฐC. The measured improvement of the mechanical properties of the treated samples depends on time and
A comprehensive study of the rheological properties of aqueous polyacrylamide solutions was carried out. A RheoStress RS100 Haake rheometer was used in the measurements. The concentration of polyacrylamide ranged from 0.25 to 1.0% by weight. This range is sufficiently wide to cover many of the rheol
The rheological properties of three cellulose samples are investigated, including the dependence of the non-Newtonian Index, structural viscosity and zero shear viscosity on temperature and the concentration of their paraformaldehyde/dimethyl sulfoxide solutions; the values of viscous flow activatio
Rheological properties of aqueous polyacrylamide-sodium chloride solutions are studied using RheoStress RS100. Polyacrylamide concentration was varied from 0.25 to 1.0% by weight, whereas sodium chloride ranged from 0.0 to 10 g L ฯช1 . This range of concentrations is suitable to study many of the pol
This article describes the rheological properties of certain poly(ethylene oxide)s dissolved in water-based solvents. The experimental results show that the rheological properties in aqueous solutions are significantly affected by the solvent properties, which have been changed by the use of ethanol