𝔖 Bobbio Scriptorium
✦   LIBER   ✦

RF Electric Field Mapping in MR Coils with a Quartz Crystal

✍ Scribed by Dah-Jyuu Wang; John S. Leigh


Book ID
102530923
Publisher
John Wiley and Sons
Year
1995
Tongue
English
Weight
408 KB
Volume
33
Category
Article
ISSN
0740-3194

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

The electric field strength and distribution in MRI/MRS probes was assessed with a quartz crystal whose resonance frequency coincided with the probe frequency. A quartz crystal was used as the sensor because: (i) it was capable of producing a resonance signal when it was excited with a pulsed RF electric field; and (ii) the resonance signal was proportional to the square of the electric field strength (or RF excitation power). The sensor was placed in the vicinity of the MR coil under evaluation and was excited with a short RF pulse applied to the coil and, immediately after the pulse, the resonance signal induced was picked up by the same coil acting as a receiver coil. Intensities of the signals were used to assess the distribution of RF electric fields in the coil. This device is useful for probe design, particularly in the minimization of dielectric losses, which have been attributed to the presence of electric fields in MR coils.


πŸ“œ SIMILAR VOLUMES


Polarization of the RF field in a human
✍ Jinghua Wang; Qing X. Yang; Xiaoliang Zhang; Christopher M. Collins; Michael B. πŸ“‚ Article πŸ“… 2002 πŸ› John Wiley and Sons 🌐 English βš– 897 KB

The RF field intensity distribution in the human brain becomes inhomogeneous due to wave behavior at high field. This is further complicated by the spatial distribution of RF field polarization that must be considered to predict image intensity distribution. An additional layer of complexity is invo

Compensation of RF field and receiver co
✍ Christian WΓΌrslin; Fabian Springer; Bin Yang; Fritz Schick πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 543 KB

## Abstract ## Purpose: To reliably compensate bias field effects in abdominal areas to accurately quantify visceral adipose tissue using standard T1‐weighted sequences on MR scanners with up to 3 Tesla (T) field strength. ## Materials and Methods: Compensation is achieved in two steps: The bias