## Abstract A new Coplanar Strip Antenna design is presented. This antenna is suitable for RFID tags, operating in the 2.4‐GHz range. Device was fabricated on RT6002 substrate of thickness __h__ = 1.5 mm. The input impedance control is based on the conformal mapping technique. A full‐wave EM simula
Retrodirective array for RFID and microwave tracking beacon applications
✍ Scribed by L. Chiu; T. Y. Yum; W. S. Chang; Q. Xue; C. H. Chan
- Publisher
- John Wiley and Sons
- Year
- 2005
- Tongue
- English
- Weight
- 155 KB
- Volume
- 48
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel and compact four‐element retrodirective array (RDA) prototype is realized. It demonstrates excellent performance in terms of retrodirectivity and sensitivity. Each element employs a phase conjugator (a biased FET mixer) with a conversion gain of 5.46 dB. The LO is set at 19.61 GHz and is pumped into the element while the RF operates at 9.8 GHz. The mixer generates an IF signal with a frequency offset of 10 MHz from the RF to separate the transponded signal from the interrogating signal. Retrodirectivity is observed over a wide range of incidence angles from −50° to +50°. © 2005 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 409–411, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21365
📜 SIMILAR VOLUMES