𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Retention of mechanical properties and cytocompatibility of a phosphate-based glass fiber/polylactic acid composite

✍ Scribed by I. Ahmed; P. S. Cronin; E. A. Abou Neel; A. J. Parsons; J. C. Knowles; C. D. Rudd

Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
773 KB
Volume
89B
Category
Article
ISSN
1552-4973

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A comparative study on the effect of agi
A comparative study on the effect of aging on mechanical properties of LLDPE–glass fiber, mica, and wood fiber composites
✍ R. G. Raj; B. V. Kokta; C. Daneault 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 437 KB 👁 2 views

Linear low density polyethylene (LLDPE) was reinforced with wood fiber, glass fiber, and mica. The effect of aging on mechanical properties of the composites was examined under different conditions: (i) exposure at 105OC for 7 days; (ii) immersion in boiling water for 4 h. Samples containing glass f

Preparation and Mechanical Properties of
Preparation and Mechanical Properties of Long Glass Fiber Reinforced PA6 Composites Prepared by a Novel Process
✍ Ke-qing Han; Zheng-jun Liu; Mu-huo Yu 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 225 KB

## Abstract **Summary:** Long glass fiber reinforced PA6 (LGF/PA6) prepregs were prepared by impregnating PA6 oligomer melt into reinforcing glass fiber followed by subsequent solid‐state polymerization (SSP) to obtain LGF/PA6 composite pellets. A conventional injection‐molding machine suitable for

Processability and mechanical performanc
Processability and mechanical performance of hybrid composites based on poly(ether sulfone) modified with a glass fiber–reinforced liquid crystalline polymer
✍ M. García; J. I. Eguiazábal; J. Nazábal 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 278 KB 👁 2 views

## Abstract Hybrid composites, based on poly(ether sulfone) (PES) and glass fiber–reinforced copolyester liquid crystalline polymer (gLCP) up to 40% gLCP, were obtained by injection molding: these polymers were immiscible. Despite its higher viscosity, the gLCP acted as a processing aid for PES. Th