✦ LIBER ✦

Resistivity recovery at low temperatures in high-purity iron charged with hydrogen

✍ Scribed by S. Moriya; S. Takaki; H. Kimura

Publisher: Elsevier Science
Year: 1978
Weight: 730 KB
Volume: 32
Category: Article
ISSN: 0025-5416
DOI: 10.1016/0025-5416(78)90213-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Amplitude Dependent Internal Friction in

Amplitude Dependent Internal Friction in High-Purity Iron Single Crystals at Low Temperatures

✍ Pal-Val, P. P. ;Kadečková, S. 📂 Article 📅 1986 🏛 John Wiley and Sons 🌐 English ⚖ 139 KB

Low-temperature dislocation relaxations

Low-temperature dislocation relaxations in high-purity iron single crystals deformed at 295 and 78 K

✍ Pal-Val, P. P. ;Natsik, V. D. ;Kadečková, S. 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 192 KB

4487264 Use of hydrogen-free carbon mono

4487264 Use of hydrogen-free carbon monoxide with steam in recovery of heavy oil at low temperatures

📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 98 KB

Methanol steam reforming in supported Pd

Methanol steam reforming in supported Pd membrane reactor The supported Pd membrane is promising for the production of high-purity hydrogen from catalytic steam reforming of methanol. At the 35°C reaction temperature, the catalyst activity and stability are promoted by increasing the alumina content. Here a compact doublejacketed reactor has generated high-purity hydrogen directly from steam reforming of methanol, with no need for external purification and a much higher recovery yield.

📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 110 KB

environments was investigated. The corrosion rate is higher under 'outlet' conditions at 700°C compared to standard conditions at 650°C and 'inlet' conditions at 600°C. The corrosion potential increases with time when a protective corrosion layer is formed. Eventually it reaches a more positive pote