๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Resistance of high-strength concrete to projectile impact

โœ Scribed by M.H. Zhang; V.P.W. Shim; G. Lu; C.W. Chew


Publisher
Elsevier Science
Year
2005
Tongue
English
Weight
378 KB
Volume
31
Category
Article
ISSN
0734-743X

No coin nor oath required. For personal study only.

โœฆ Synopsis


This paper presents the results of an experimental study on the impact resistance of concrete with compressive strengths of 45โ€“235MPa when subjected to impact by 12.6mm ogive-nosed projectile at velocities ranging from โˆผ620 to 700m/s. The results indicate that the penetration depth and crater diameter in target specimens exhibit an overall reduction with an increase in the compressive strength of the concrete. However, the trend is not linear. Further increase in the compressive strength requires a reduction in the water-to-cementitious material ratio and the elimination of coarse aggregates. However, doing these does not result in reduction of the penetration depth and crater diameter. The presence of coarse granite aggregates appears to be beneficial in terms of reducing penetration depth, crater diameter, and crack propagation, thus contributing to impact resistance. Incorporation of steel fibers in the concrete reduced the crater diameter and crack propagation, but did not have a significant effect on penetration depth. An increase in the curing temperature from 30ยฐC to 250ยฐC did not alter the impact resistance of the concrete significantly. Based on the present findings and cost consideration, high-strength fiber-reinforced concrete with a compressive strength of โˆผ100MPa appears to be most efficient in protection against projectile impact.


๐Ÿ“œ SIMILAR VOLUMES


An experimental study of penetration res
โœ Vemuri Madhu; K. Ramanjaneyulu; T. Balakrishna Bhat; N.K. Gupta ๐Ÿ“‚ Article ๐Ÿ“… 2005 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 789 KB

An experimental study has been carried out on the ballistic performance of 95% and 99.5% alumina ceramic tiles backed by metal plates, when subjected to normal impact of hard steel 12.7 mm armour piercing (AP) projectiles at velocities ranging from 500 to 830 ms ร€1 . Typical damaged targets and brok