✦ LIBER ✦

Residual stress modelling by experimental measurements and finite element analysis

✍ Scribed by BEGHINI, M; BERTINI, L

Book ID: 118025575
Publisher: SAGE Publications
Year: 1990
Tongue: English
Weight: 477 KB
Volume: 25
Category: Article
ISSN: 0309-3247
DOI: 10.1243/03093247v252103

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Finite Element Modelling of Residual Str

Finite Element Modelling of Residual Stress in Pipe Welds

✍ S. W. Wen; D. C. J. Farrugia 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 398 KB

Prediction of residual stress-induced cr

Prediction of residual stress-induced cracking by finite element analysis

✍ S.Y. Kweon; S.K. Choi 📂 Article 📅 1995 🏛 Elsevier Science ⚖ 463 KB

Modelling the influence of residual stre

Modelling the influence of residual stress on crack parameter by finite element method

✍ A. Mishra; T. Prasad; F. Sinha 📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 616 KB

A finite element model is presented for investigating the influence of residual stress induced due to grinding on mouth opening displacement (MOD) values. A general three-dimensional case is studied by converting it to a two-dimensional one using semi-analytical finite-element method. Auxiliary load

Residual stress characteristics of butt-

Residual stress characteristics of butt-welded flange by finite element analysis

✍ Yong-Lun Song; Xiao-Hong Yang; Guo-Wei Ran; Tian-Jiao Xiao; Si-Bo Yan 📂 Article 📅 2011 🏛 Springer-Verlag 🌐 English ⚖ 637 KB

Elasto-visco-plastic finite-element anal

Elasto-visco-plastic finite-element analysis of a cold upsetting test and stress-state validation by residual-stress measurements

✍ B. Michel; J.C. Boyer 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 618 KB

Finite element simulation of residual st

Finite element simulation of residual stresses and their measurement by contour method

✍ N. Murugan; R. Narayanan 📂 Article 📅 2009 🏛 Elsevier Science ⚖ 747 KB

A three-dimensional transient thermo-mechanical simulation has been performed on a welded Tee-joint using the finite element method, to predict longitudinal residual stresses. The uncoupled thermomechanical simulation consists of two stages. The first stage involves the prediction of the complete th