✦ LIBER ✦

Residual stress measurement in thermal sprayed hydroxyapatite coatings

✍ Scribed by S. R. Brown; I. G. Turner; H. Reiter

Publisher: Springer
Year: 1994
Tongue: English
Weight: 553 KB
Volume: 5
Category: Article
ISSN: 0957-4530
DOI: 10.1007/bf00120371

No coin nor oath required. For personal study only.

✦ Synopsis

Hydroxyapatite coatings have been used for many years on dental and prosthetic implants to provide a biocompatible surface for tong-term fixation of the implant to bone. In this study two thermal spraying processes, air plasma spraying (APS) and a high velocity oxy fuel process (CDS) have been employed to produce hydroxyapatite coatings. An X-ray diffraction technique (XRD) has been applied to measure the residual stresses in thermal sprayed hydroxyapatite coatings. It has been shown that such stresses are sensitive to spraying parameters and that the newer high velocity oxy fuel spraying process results in lower residual stresses than the conventional air plasma spraying process. Heat treatment of the coating has been shown to significantly reduce the residual stress in the coating.

📜 SIMILAR VOLUMES

Calculation of residual thermal stress i

Calculation of residual thermal stress in plasma-sprayed coatings

✍ R. Elsing; O. Knotek; U. Balting 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 554 KB

Residual stress measurement in alumina c

Residual stress measurement in alumina coatings

✍ I. Kraus; N. Ganev; G. Gosmanová; H.-D. Tietz; L. Pfeiffer; S. Böhm 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 192 KB

Residual stresses in plasma-sprayed A1203 layers were investigated by means of X-ray diffraction with Cr and Cu radiation. No stress gradient was indicated in the surface layers of the alumina coatings within the range of the penetration depth of the applied radiation. Different stress values were o

Quenching, thermal and residual stress i

Quenching, thermal and residual stress in plasma sprayed deposits: NiCrAlY and YSZ coatings

✍ J. Matejicek; S. Sampath; P.C. Brand; H.J. Prask 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 667 KB

Characterization and residual stresses o

Characterization and residual stresses of WC–Co thermally sprayed coatings

✍ Y.Y. Santana; P.O. Renault; M. Sebastiani; J.G. La Barbera; J. Lesage; E. Bempor 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 496 KB

Thermal residual stresses near the inter

Thermal residual stresses near the interface between plasma-sprayed hydroxyapatite coating and titanium substrate: Finite element analysis and synchrotron radiation measurements

✍ Cofino, B. ;Fogarassy, P. ;Millet, P. ;Lodini, A. 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 495 KB

Plasma-sprayed hydroxyapatite (HA) coatings on titanium alloy are often used in prosthetic implants. The metallic substrate gives the implant good mechanical strength which is combined with good biocompatibility and osteointegration of the ceramic coating. However, the interface between the HA coati

In vitrotesting of plasma-sprayed hydrox

In vitrotesting of plasma-sprayed hydroxyapatite coatings

✍ K. A. Gross; C. C. Berndt 📂 Article 📅 1994 🏛 Springer 🌐 English ⚖ 607 KB