✦ LIBER ✦

Residual stress effects on fatigue crack growth in a Ti-6Al-4V friction stir weld

✍ Scribed by S. PASTA; A. P. REYNOLDS

Book ID: 109015406
Publisher: John Wiley and Sons
Year: 2008
Tongue: English
Weight: 640 KB
Volume: 31
Category: Article
ISSN: 8756-758X
DOI: 10.1111/j.1460-2695.2008.01258.x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

FRICTIONAL EFFECTS ON FATIGUE CRACK GROW

FRICTIONAL EFFECTS ON FATIGUE CRACK GROWTH IN β -ANNEALED Ti-6Al-4V

✍ T. S. Gross; S. Bose; L. Zhong 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 604 KB

Effect of process parameters on stir zon

Effect of process parameters on stir zone microstructure in Ti–6Al–4V friction stir welds

✍ L. Zhou; H. J. Liu; Q. W. Liu 📂 Article 📅 2010 🏛 Springer 🌐 English ⚖ 559 KB

Fatigue crack growth in 2024-T351 fricti

Fatigue crack growth in 2024-T351 friction stir welded joints: Longitudinal residual stress and microstructural effects

✍ L. Fratini; S. Pasta; A.P. Reynolds 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 685 KB

The role of longitudinal residual stress on propagation of fatigue cracks was examined in friction stir welds produced in 2024-T351 aluminum alloy. Fatigue crack growth rate was obtained through constant DK Iapp tests for notches at different distances from the weld centerline. Subsequently, crack g

The effect of microstructures on the fat

The effect of microstructures on the fatigue crack growth in Ti6Al4V laser welds

✍ L.W. Tsay; C.Y. Tsay 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 693 KB

Effects of fretting fatigue on the resid

Effects of fretting fatigue on the residual stress of shot peened Ti–6Al–4V samples

✍ S.A. Martinez; S. Sathish; M.P. Blodgett; S. Mall; S. Namjoshi 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 328 KB

The influence of porosity on the fatigue

The influence of porosity on the fatigue crack growth behavior of Ti–6Al–4V laser welds

✍ L. W. Tsay; Y.-P. Shan; Y.-H. Chao; W. Y. Shu 📂 Article 📅 2006 🏛 Springer 🌐 English ⚖ 622 KB