✦ LIBER ✦

Residual oil cracking with generation of hydrogen: deactivation of iron oxide catalyst in the steam-iron reaction

✍ Scribed by Satoshi Fukase; Teruo Suzuka

Publisher: Elsevier Science
Year: 1993
Tongue: English
Weight: 962 KB
Volume: 100
Category: Article
ISSN: 0926-860X
DOI: 10.1016/0926-860x(93)80111-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Kinetic study on the reactions involved

Kinetic study on the reactions involved in hot gas desulfurization using a regenerable iron oxide sorbent—III. Reactions of the sulfided sorbent with steam and steam-air mixtures

✍ S.S. Tamhankar; S. Garimella; C.Y. Wen 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 695 KB

In continuation of the earlier studies on sorbent regeneration, reactions of the sulfided iron oxide sorbent with steam and steam-air mixtures were investigated. This paper describes experimental results on the kinetics of these reactions. As before, experiments were conducted in a thermogravimetric

The mechanism of the oxidation of some c

The mechanism of the oxidation of some carbohydrates and polyhydric alcohols by hydrogen peroxide with iron salts as catalyst in acid media

✍ A. Th. Küchlin; J. Böeseken 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 713 KB

Methanol steam reforming in supported Pd

Methanol steam reforming in supported Pd membrane reactor The supported Pd membrane is promising for the production of high-purity hydrogen from catalytic steam reforming of methanol. At the 35°C reaction temperature, the catalyst activity and stability are promoted by increasing the alumina content. Here a compact doublejacketed reactor has generated high-purity hydrogen directly from steam reforming of methanol, with no need for external purification and a much higher recovery yield.

📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 110 KB

environments was investigated. The corrosion rate is higher under 'outlet' conditions at 700°C compared to standard conditions at 650°C and 'inlet' conditions at 600°C. The corrosion potential increases with time when a protective corrosion layer is formed. Eventually it reaches a more positive pote