Reshaping of picosecond optical pulses with a simple interferometer
✍ Scribed by Zhou Xianwei; Wang Jianping
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 222 KB
- Volume
- 49
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In optical fiber communication systems, reshaping is crucial for long‐haul transmission and networks due to the accumulated noise and dispersion, which will gradually degrade the signals. In this article, a SOA (Semiconductor Optical Amplifier)‐based interferometer is proposed to realize all‐optical signal reshaping. Such scheme is known as advantageous for operation at high speed, which is analyst in theory. The distorted picosecond optical pulses train with repetition rate of 10 GHz is reshaped successfully in experiments employing this simple interferometer. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 1606–1608, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22534
📜 SIMILAR VOLUMES
We propose a no¨el pulsed fiber laser rotation sensor with a LiNbO integrated optic circuit, Sagnac fiber loop, Er-doped fiber, and 3 semiconductor pumping lasers. A simple analysis is completed and the output equation is deri¨ed. The ¨ariance of the output pulse when rotation occurs is also analyze
## Abstract This paper presents the design of a low‐timing‐jitter, stable picosecond optical‐pulse source, which is based on a low‐cost, uncooled Fabry–Perot (FP) semiconductor laser in the gain‐switching operation. The wavelength of the designed laser can be tuned from 1538 to 1554 nm under the co
We have developed a self-seeding system to generate wavelength-tunable optical short pulses with a highly improved sidemode-suppression ratio (SMSR) over a large wavelength-tuning range. The external cavity of the gain-switched Fabry-Pe ´rot laser diode consists of two fiber Bragg gratings (FBGs) co
## 5. For other orthogonal coordinates (u, L', z) (such as elliptic, parabolic coordinates, and so forth) problems will arise both in the solution of field components E, and H, from Eq. ( 9) and in fulfillment of the boundary conditions by calculating transverse field components with the use of Eq.