## Abstract Most coal fly ashes currently produced in The Netherlands contain leachable trace elements in amounts higher than allowed by Dutch law for its free application as a granular building material. To improve their technical and environmental quality, these ashes were subjected to forced lea
Removal of selected heavy metals from MSW fly ash by the electrodialytic process
✍ Scribed by Célia Ferreira; Pernille Jensen; Lisbeth Ottosen; Alexandra Ribeiro
- Publisher
- Elsevier Science
- Year
- 2005
- Tongue
- English
- Weight
- 520 KB
- Volume
- 77
- Category
- Article
- ISSN
- 0013-7952
No coin nor oath required. For personal study only.
✦ Synopsis
This paper aims to assess the applicability of the electrodialytic remediation technique for the removal of zinc, lead, copper and cadmium from municipal solid waste (MSW) incinerator fly ash. A broad range of experimental conditions were studied including current densities, remediation times, use of assisting agents and cell design.
Several operational problems were identified during the electrodialytic experiments, among which are formation of precipitates, dryness of sample and partial dissolution of sample creating preferential pathways for the electric current. These problems may explain the low remediation efficiencies obtained.
Comparison between experiments showed that generally the use of Na-gluconate as assisting agent leads to better results than distilled water. Increasing the concentration of the assisting agent also results in higher removals.
📜 SIMILAR VOLUMES
## Abstract **BACKGROUND:** Municipal solid waste incinerator (MSWI) fly ash is regarded as hazardous waste because it contains various toxic metals. A previous study has shown that fly ash can be detoxified by removal of heavy metals. In this work, the extractability of heavy metals from MSWI fly