𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Removal of air from liver specimens via vacuum

✍ Scribed by F. Graham Sommer; Hilary Solomon; Barbara Carroll

Publisher
John Wiley and Sons
Year
1986
Tongue
English
Weight
252 KB
Volume
14
Category
Article
ISSN
0091-2751

No coin nor oath required. For personal study only.

✦ Synopsis

Fresh liver specimens have been ultrasonically imaged in vitro in order to evaluate specimen air content before the acquisition of ultrasonic waveform data for tissue characterization studies. It was found necessary to expose liver slices to vacuum for about 16 h in order to remove enough air to acquire waveform data from air-free regions of interest in these slices. Larger portions of liver, and whole liver, were found to retain large amounts of air even after 16 h of exposure to vacuum.

πŸ“œ SIMILAR VOLUMES

Adsorbents for removal of mercury vapor
Adsorbents for removal of mercury vapor from air
✍ J.K Thompson πŸ“‚ Article πŸ“… 1975 πŸ› Elsevier Science 🌐 English βš– 133 KB

graphite were tested at room temperature. The ratio of bend strength to tensile strength was close to that predicted by the Weibull theory of strength, but the effect of sample volume was much less than predicted by Weibull theory. appear to be responsible for the acidity found on the surface of thi

00/03552 Removal of boiler emissions fro
00/03552 Removal of boiler emissions from air
πŸ“‚ Article πŸ“… 2000 πŸ› Elsevier Science βš– 217 KB

08 Steam raising (boiler operation/design) compatible with the EU, Turow decided to, replace and upgrade six units (l-6) from 200 to 230 MW units and remove one unit 7. Units 8, 9 and 10 were equipped with dry sorbent desulfurization technology. Units 1 and 2 were replaced with new clean coal, circu

Biological removal of carbon disulfide f
Biological removal of carbon disulfide from waste air streams
✍ Hugler, Walter ;Acosta, Craso ;Revah, Sergio πŸ“‚ Article πŸ“… 1999 πŸ› American Institute of Chemical Engineers 🌐 English βš– 560 KB

## Abstract A pilot‐scale biological control system for the treatment of 3400 m^3^ h^βˆ’1^ of a gaseous stream containing up to 7.8g CS~2~ m^βˆ’3^ and trace amounts of hydrogen sulfide (H~2~S) was installed in a cellulose sponge manufacturing facility. The objective was to demonstrate the capability of