𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Reloading effects on plane plates subjected to non-contact underwater explosion

✍ Scribed by R. Rajendran


Publisher
Elsevier Science
Year
2008
Tongue
English
Weight
548 KB
Volume
206
Category
Article
ISSN
0924-0136

No coin nor oath required. For personal study only.

✦ Synopsis


Underwater explosion damage of a plane plate restrained at its edges occurs in more than one phase. While the initial plate kick-off velocity is due to the primary shock pulse, the secondary, tertiary and the following responses are clearly due to the reloading effects.

The tensile wave during reflection creates water breaking which causes bulk or midmass cavitation whereas the rarefaction produced by the moving plate at its front causes surface cavitation. Multiple reflection of the tensile wave between the cavitated zone and the plate surface causes multiple pressure peaks. Closure of the cavitated space by the interaction of the expanding gas bubble causes major reloading on the plate. After a long gap, the secondary pulse emitted by the gas bubble is felt by the plate. This paper brings out a detailed insight into the reloading phenomenon by comparing the total damage measured during experiments against the theoretical primary pulse damage.


πŸ“œ SIMILAR VOLUMES


Linear elastic shock response of plane p
✍ R Rajendran; K Narasimhan πŸ“‚ Article πŸ“… 2001 πŸ› Elsevier Science 🌐 English βš– 346 KB

Linear elastic shock response of plane plates subjected to underwater explosion is of importance to warship designers. Underwater explosion experiments were carried out with small quantity of explosive charges on air-backed 4 mm high strength low alloy (HSLA) steel circular plates of 290 mm diameter

Vibration of non-ideal simply supported
✍ K. Malekzadeh; S.M.R. Khalili; P. Abbaspour πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 870 KB

In this paper, the effect of non-ideal boundary conditions and initial stresses on the vibration of laminated plates on Pasternak foundation is studied. The plate has simply supported boundary conditions and is assumed that one of the edges of the plate allows a small non-zero deflection and moment.