Release of inorganic material during coal devolatilization
β Scribed by Larry L. Baxter; Reginald E. Mitchell; Thomas H. Fletcher
- Publisher
- Elsevier Science
- Year
- 1997
- Tongue
- English
- Weight
- 723 KB
- Volume
- 108
- Category
- Article
- ISSN
- 0010-2180
No coin nor oath required. For personal study only.
β¦ Synopsis
Experimental results presented in this paper indicate that coal devolatilization products convectively remove a fraction of the nonvolatile components of inorganic material atomically dispersed in the coal matrix. Results from three facilities burning six different coals illustrate this mechanism of ash transformation and release from coal particles. Titanium is chosen to illustrate this type of mass release from coal particles on the basis of its low volatility and mode of occurrence in the coal. During moderate rates of devolatilization (lo4 K/s heating rate), no significant loss of titanium is noted. At more rapid rates of heating/devolatilization (10' K/s) a consistent but minor (3%-4%) loss of titanium is noted. During rapid devolatilization (5 X lo5 K/s and higher), significant (lo%-20%) amounts of titanium leave the coal. The loss of titanium monitored in coals ranging in rank from subbituminous to high-volatile bituminous coals and under conditions typical of pulverized-coal combustion. The amount of titanium lost during devolatilization exhibits a complex rank dependence. These results imply that other atomically dispersed material (alkali and alkaline earth elements) may undergo similar mechanisms of transformation and release.
π SIMILAR VOLUMES
Fluidized bed combustion offers great potential for the utilization of high-sulphur coal and low-grade coal in an environmentally acceptable manner. Utilization of fluidized bed technology, especially for the combustion of low quality lignites, enables pollutant emission control as well as efficient
Time-resolved measurements of the rate of devolatilization of high volatile bituminous coal particles in nitrogen at gas temperatures of 1050 and 1250 K are presented. Size fractions studied here are 63-75 and 106-125 tzm in diameter, with particle heating rates approaching 104 K/s. Particle samples