✦ LIBER ✦

Relaxation processes in metals at high strain rates

✍ Scribed by V. A. Skripnyak; A. I. Potekaev

Book ID: 112370339
Publisher: Springer
Year: 1995
Tongue: English
Weight: 589 KB
Volume: 38
Category: Article
ISSN: 1573-9228
DOI: 10.1007/bf00559288

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Strength of Metals at High Strain Rates

✍ G. V. Stepanov 📂 Article 📅 2002 🏛 Springer 🌐 English ⚖ 69 KB

Plastic bulging of sheet metals at high

Plastic bulging of sheet metals at high strain rates

✍ Maziar Ramezani; Zaidi Mohd Ripin; Roslan Ahmad 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 523 KB

Load-relaxation testing at elevated stra

Load-relaxation testing at elevated strain rates

✍ D. W. Henderson; R. C. Kuo; C. -Y. Li 📂 Article 📅 1985 🏛 Springer 🌐 English ⚖ 589 KB

Glass dynamics at high strain rates

✍ Langer, J. S.; Egami, Takeshi 📂 Article 📅 2012 🏛 The American Physical Society 🌐 English ⚖ 339 KB

Stress relaxation and hysteresis at vari

Stress relaxation and hysteresis at various strain rates

✍ Franklin S. C. Chang 📂 Article 📅 1964 🏛 John Wiley and Sons 🌐 English ⚖ 806 KB

Applying the Boltzmann superposition principle on a generalized Maxwell model, an analysis of the relations between extension, relaxation, and hysteresis is presented, which shows that any one of these three can be calculated from the other two. It is shown that the relaxation modulus does not vary

Adiabatic flow curves of metallic materi

Adiabatic flow curves of metallic materials at high strain rates

✍ Univ.-Prof. Dr.-Ing. E. El-Magd; H. Scholles; H. Weisshaupt 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 655 KB

## Abstract Dynamic compression tests are carried out on Armco iron, Cr‐V‐steel, Ni‐Cr‐Mo‐V‐steel, an austenitic Ni‐Cr‐Mo‐steel, tantalum, nickel and Ni~3~Al and magnesium. The flow curves are analysed to determine the influence of the deformation energy which is tranformed into heat on the flow be