✦ LIBER ✦

Regeneration of aluminum silicate catalysts in a fluid bed

✍ Scribed by A. M. Grekova; L. L. Nemets; V. V. Manshilin

Publisher: Springer US
Year: 1966
Tongue: English
Weight: 324 KB
Volume: 2
Category: Article
ISSN: 0009-3092
DOI: 10.1007/bf00726686

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mathematical model of industrial apparat

Mathematical model of industrial apparatus for the regeneration of aluminum silicate catalyst in a moving bed

✍ Yu. M. Zhorov; G. M. Panchenkov; M. V. Kozlov; Yu. I. Laz'yan; A. A. Orekhov 📂 Article 📅 1967 🏛 Springer US 🌐 English ⚖ 271 KB

Regeneration of the finely dispersed alu

Regeneration of the finely dispersed aluminum-cobalt-molybdenum catalyst used for hydrocracking in a fluid bed

✍ V. V. Manshilin; A. M. Grekova; E. I. Bobkovskii; Yu. K. Vail'; L. M. Zin'kov 📂 Article 📅 1972 🏛 Springer US 🌐 English ⚖ 264 KB

Microeruptions of gas in a fluid bed

✍ L. K. Vasanova 📂 Article 📅 1966 🏛 Springer US 🌐 English ⚖ 166 KB

Regeneration of activated carbons used i

Regeneration of activated carbons used in waste-water treatment by a moving-bed regenerator

✍ Kenji Hashimoto; Kouichi Miura; Susumu Kyotani 📂 Article 📅 1985 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 911 KB

Fouling of bifunctional catalysts in a p

Fouling of bifunctional catalysts in a packed bed reactor

✍ Adrian C. Snyder; John C. Matthews 📂 Article 📅 1973 🏛 Elsevier Science 🌐 English ⚖ 313 KB

Heat and mass transfer in a reforming ca

Heat and mass transfer in a reforming catalyst bed: Analytical prediction of distributions in the catalyst bed

✍ Yutaka Usami; Shoichiro Fukusako; Masahiko Yamada 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 803 KB

## Abstract Heat and mass transfer characteristics within a reforming catalyst bed have been analytically investigated. A numerical analysis was carried out in a two‐dimensional steady‐state model of a reforming catalyst bed. The reforming tube was filled with catalyst and the tube wall was uniform