✦ LIBER ✦

Recent advances in electron-beam curing of carbon fiber-reinforced composites

✍ Scribed by Xavier Coqueret; Mickael Krzeminski; Philippe Ponsaud; Brigitte Defoort

Book ID: 108256929
Publisher: Elsevier Science
Year: 2009
Tongue: English
Weight: 360 KB
Volume: 78
Category: Article
ISSN: 0969-806X
DOI: 10.1016/j.radphyschem.2009.03.042

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Electron-beam curing of thick thermoset

Electron-beam curing of thick thermoset composites: Effect of temperature and fiber

✍ Thierry Glauser; Mats Johansson; Anders Hult 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 68 KB

Recent Advances in the Application of Na

Recent Advances in the Application of Natural Fiber Based Composites

✍ Jitendra K. Pandey; S. H. Ahn; Caroline S. Lee; Amar K. Mohanty; Manjusri Misra 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 442 KB 👁 1 views

## Abstract Natural fiber reinforced polymer composites are lightweight, economical and available in a variety of forms. They have low densities, comparable material properties, high molding flexibility and are environmentally friendly, making them a conceivable alternative to traditional fillers l

Behaviour of carbon fiber reinforced cem

Behaviour of carbon fiber reinforced cement composites in direct tension

✍ H.A. Toutanji; T. El-Korchi; R.N. Katz; G.L. Leatherman 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 597 KB

The effect of carbon fibers on the tensile strength of cement paste matrix was experimentally and analytically investigated. The tensile strength values were obtained using the cementitious composites axial tensile technique (CCATr) [ 1,2]. The addition of 1, 1.5, 2, and 3 volume percent ofpolyacry

Curing and pyrolysis of polysiloxane/div

Curing and pyrolysis of polysiloxane/divinylbenzene and its derived carbon fiber reinforced Si—O—C composites

✍ Q. S. Ma; Z. H. Chen; W. W. Zheng; H. F. Hu 📂 Article 📅 2005 🏛 Springer 🌐 English ⚖ 597 KB

The application of PEEK in stainless ste

The application of PEEK in stainless steel fiber and carbon fiber reinforced composites

✍ Hua Fu; Bo Liao; Fang-juan Qi; Bao-chen Sun; Ai-ping Liu; De-liang Ren 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 809 KB

The mixing ingredient of the semi-metallic friction material -stainless fiber and carbon fiber reinforced polyether-ether-ketone (PEEK) -its hot-molding process, friction performance and wear resistance are studied in this paper. The friction and wear mechanism was analyzed through observing the wor

Modeling of conductivity in carbon fiber

Modeling of conductivity in carbon fiber-reinforced cement-based composite

✍ Jing Xu; Wenhui Zhong; Wu Yao 📂 Article 📅 2010 🏛 Springer 🌐 English ⚖ 402 KB