Recent Advances in Applied Mechanics and Mechanical Engineering: Select Proceedings of ICAMME 2022 (Lecture Notes in Mechanical Engineering)

✍ Scribed by Sanjay Yadav (editor), Harish Kumar (editor), Meher Wan (editor), Pawan Kumar Arora (editor), Yusri Yusof (editor)

• Publisher: Springer
• Year: 2023
• Tongue: English
• Leaves: 513
• Category: Library

✦ Synopsis

This book provides select proceedings of the 3rd International Conference on Applied Mechanics and Mechanical Engineering (ICAMME 2022). It covers the latest research in the fields of mechanics and mechanical engineering. Various topics covered in this book are engineering design, machinery and machine elements, mechanical structures and stress analysis, automotive engineering, engine technology, aerospace technology and astronautics, mechanical intelligent control and robotics, mechatronics, dynamical systems and control, fluid mechanics, industrial manufacturing and applied mechanics. The book will be useful for researchers and professionals working in the various fields of mechanical engineering.

✦ Table of Contents

Committee Members
Preface
Contents
About the Editors
Nonlinear Dynamic Analysis of Elastic Robotic Arms
1 Introduction
2 Dynamic Modeling of Elastic Manipulator
3 Dynamic Analysis of Elastic Manipulator
4 A Multiscale Method for the Approximate Analytical Solution of the Elastic Arm Dynamic Equation
5 Numerical Calculation and Analysis
6 Conclusion
References
Influence of the Modulus of Elasticity of the Jointed Material and Interlayers in Nodes with an Interlayer with a High TCLE
1 Introduction
2 Experimental Details
3 Results and Discussion
3.1 The Stress Fields in Small Areas Near the Interlayer and the Base Metal
3.2 The Effect of Volumetric SSS on the Strength and Plasticity of the Material in the Joint
4 Conclusions
References
Research on Imaging Method of Missile-Borne Infrared Lateral Window Adapting to Deflection Light Path with Large Incident Angle
1 Introduction
2 Design of Imaging System of Missile-Borne Infrared Lateral Window
2.1 Analysis of Imaging Problems of Infrared Lateral Window
2.2 Deflection Light Path Design
2.3 System Design
3 Imaging Quality Evaluation of Infrared Lateral Window System
3.1 Test Result of MTF, NETD and MRTD
3.2 Full-Field Point Array Diagram and Distortion Detection
3.3 Experimental Observation of Infrared Lateral Window Imaging System
4 Conclusion
References
Study on the Characteristics of Rollover Injury of Passenger on the Passenger Side of an Off-Road Vehicle
1 Introduction
2 Establishment of Rollover Simulation Model
3 Model Accuracy Validation
4 Occupant Dynamic Response and Damage Assessment
4.1 Head Injury Analysis
4.2 Analysis of Neck Injury
4.3 Analysis of Chest Injury
4.4 Analysis of Leg Injury
5 Summary
References
Study on the Failure Mechanism and Reliability of Silicon Aluminum Alloy Under Impact Loading
1 Introduction
2 Materials and Methods
2.1 Test Material
2.2 Equipment Overview
3 Results and Discussion
3.1 Impact Tests and Numerical Simulations
3.2 Fracture Failure Analysis
3.3 Structure Optimization and Validation
4 Conclusion
References
Analysis of Prefabricated Fragment Intrusion Damage Based on Complete Restart Technique
1 Introduction
2 Theoretical Studies
2.1 Particle Blast Method (PBM) Theory
2.2 Complete Restart Technique
3 PBM Algorithm Validation
3.1 Steel Plate Bench Test
3.2 Simulated Analysis
4 Analysis of Fragment Penetration Damage
4.1 End-Face Penetration Analysis of Fragments
4.2 Lateral Penetration Analysis of Fragments
5 Conclusion
References
Flexible Thermal Invisibility Cloak with Meta-Structures: Design and Fabrication
1 Introduction
2 Design of Thermal Invisibility Cloak with Meta-Structures
3 Fabrication and Test of Flexible Thermal Invisibility Cloak
4 Conclusion
References
Research on Topology Optimization Methods for Continuum Structures
1 Introduction
2 Optimization of Topological Optimization Criterion Algorithm
2.1 Optimization Steps of the Topology Optimization Criterion Algorithm for Continuum Structure Based on the SIMP Method
2.2 Optimization of Continuum Structure Topology Optimization Criterion Algorithm Based on SIMP Method
3 Numerical Instability and Solution in the Algorithm
3.1 Instability
3.2 Solution
4 Example Calculation and Result Analysis
4.1 Effect of Different Parameters in the Optimization Algorithm
4.2 Other Classical Calculation Examples and Analysis of Results
5 Conclusion
References
Study on Interface and Joint Properties of Aluminum Alloy by High-Power Ultrasonic Welding
1 Introduction
2 Experimental Methods
2.1 Experiment Material
2.2 The Experimental Apparatus
2.3 Experimental Methods
3 Results and Discussion
3.1 Interfacial Structure Characteristics
3.2 Interface Temperature
3.3 Mechanical Property
3.4 Webster Hardness
4 Conclusion
References
Analysis of Nozzle Flow Based on Small Disturbance Equation Using Successive Over Relaxation Method
1 Introduction
2 Description of Successive Over Relaxation Method
2.1 Jacobi’s Method
2.2 Gauss–Seidel Method
2.3 Successive Over Relaxation (SOR) Method
3 The Small Disturbance Equation
3.1 Derivation
3.2 The Wave Equation
3.3 Differential Iterative Calculation of Small Perturbation Equations
4 Results and Discussion
4.1 Subsonic Case
4.2 Supersonic Case
4.3 The Accuracy
5 Conclusion
References
On Optimal Tooth Profile Modification of Helical Gears Based on High Precision FEM
1 Introduction
2 Parameters of TPM
3 TPM Parameters Optimization
4 Loaded Tooth Contact Analysis
4.1 Influence of TPM on TE and Meshing Stiffness
4.2 The Influence of TPM on Contact Stress and Bending Stress
5 Conclusions
References
Numerical Study on Atomization Process of Transverse Jet
1 Introduction
2 Numerical Simulation Method
2.1 Physical Model and Meshing
2.2 Mathematical Model
3 Computational Results and Analysis
4 Conclusion
References
Mechanism of Collision and Adhesion Between Adhesive Impact Ball and Spacecraft
1 Introduction
2 Material and Structure of the Impact Ball
3 Impact Penetration Analysis
4 Analysis of Adhesion Mechanism After Collision
4.1 Rebound Force
4.2 Adhesion Force
5 Conclusion
References
A Pose Calibration Method for Serial Robots Considering Joint Variables
1 Introduction
2 Kinetic Model of Serial Robot
2.1 Theoretical Kinematic Model
2.2 Actual Kinematic Model
3 Error Analysis of Serial Robot
3.1 Error Model
3.2 Identification of Error Model
4 Simulation Test
4.1 Simulation: Robot KUKARK500
4.2 Simulation: Industrial Robot HH150
4.3 Verification Test
5 Conclusion
References
Research on Rigid-Flexible Coupling Problem of Piston-Pump Tube
1 Introduction
2 Theoretical Basis
2.1 Dynamic Equation of Flexible Pump Tube
2.2 Contact Collision Model
3 Piston-Pump Tube Dynamics Model
4 Dynamic Simulation of Piston-Pump Tube Model
4.1 Parameter Settings
4.2 Dynamic Simulation Results
5 Conclusions
References
Route to a Chaotic State in the Wake of a NACA0015 Airfoil at Post-stall Angles of Attack
1 Introduction
2 Numerical Method
3 Results
3.1 The Effect of Reynolds Numbers
3.2 The Effect of Angle of Attack
4 Conclusions
References
Research on Kinematic Characteristics of Revolving Chain Shell Magazine
1 Introduction
2 Dynamic Model
3 Analysis of Equivalent Moment of Inertia of Cartridge
4 Numerical Simulation About Influence of Driving Sprocket on the Motion Law
5 Conclusion
References
Separate Heat Pipe Research Status of Application in Passive Cooling System
1 Introduction
2 Fundamentals of Split Heat Pipes
3 Application of Separated Heat Pipe in Nuclear Containment Heat Dissipation
3.1 Application of Separated Heat Pipe in Passive Cooling System
3.2 Study on Other Applications of Separated Heat Pipes
4 Outlook
References
Current Status and Prospects for Quantification of 3D Printing
1 Introduction
2 The State of 3D Printing
3 Types of 3D Printing
3.1 FDM (Fused Deposition Modeling)
3.2 SLA-Vat Photopolymerization
3.3 Binder Jetting
3.4 Powder Bed Fusion-SLS
4 Advantages of 3D Printing
4.1 An Increase in the Productiveness of Production
4.2 An Efficient Management of Expenses
4.3 Easily Portable and Capable of Being Relocated
5 Limitation
6 Development Prospects
6.1 Aerospace
6.2 Medical Treatment
6.3 Material
6.4 The Demand for Personalized Products
7 Conclusion
References
Development Trend of Monitoring System Application in Coal, Metal and Non-metal Mines
1 Introduction
2 The Necessity of Safety Monitoring and Monitoring Technology
3 Analysis of Status Quo of Mine Monitoring System and Selection of Monitoring Parameters
3.1 Analysis on the Status Quo of Mine Monitoring System
3.2 Selection of Monitoring Parameters
4 Early Warning System Function
4.1 System Hardware Features
4.2 System Software Features
5 Conclusion
References
Weighted Modal Strain Energy Damage Identification Based on Image Sequences
1 Introduction
2 Weighted Modal Strain Energy
3 Optical Flow Method
4 Numerical Simulation Analysis of Cantilever Beam Damage
4.1 Finite Element Model and Calculation Condition of Cantilever Beam
4.2 Process of Damage Identification
4.3 Result Analysis
5 Experimental Study on Damage of Cantilever Beam
5.1 Test Overview
5.2 Test Conditions
5.3 Analysis of Results
6 Conclusion
References
Solution of the Full Potential Equation on an Airfoil by Physics-Informed Neural Network
1 Introduction
2 Full Potential Equation
2.1 Full Potential Equation of Aerodynamic
2.2 Boundary Conditions
3 PINN Method
3.1 Network Architecture
3.2 Problem Formulation
4 Experimental Results
4.1 Calculation Results and Accuracy of PINN Method
4.2 Advantages and Disadvantages
5 Model Optimization
5.1 Network Architecture
5.2 Training Data
5.3 Learning Rate
6 Conclusion
References
Analysis and Research on Magnetic Leakage Simulation of Bimetallic Composite Pipe
1 Introduction
2 The Principle of Pipeline Inspection on Magnetic Leakage
3 Establishment and Solution of the Bimetallic Pipe Magnetic Leakage Detection Model
3.1 Bimetallic Composite Pipe
3.2 Magnetic Excitation Structure
3.3 Initial Magnetic Circuit Model Solving
4 Determination of the Relationship Between the Parameters of the Excitation Structure
4.1 Permanent Magnet Thickness
4.2 Permanent Magnet Cross-Sectional Area
4.3 Magnetic Yoke Length
5 Conclusion
References
Health State Assessment of Large Complex Equipment Based on Modified ER Algorithm
1 Introduction
2 Evaluation Model of ER Algorithm for Multiple Attribute Decision Making
2.1 Definition and Representation of Multi-Attribute Evaluation Problems
2.2 Probability Assignment Function of Basic Attributes of ER Algorithm
2.3 ER Information Fusion Algorithm
3 Normalization and Quantification of Health Status Assessment Information
4 Time Correction of Health Status Assessment Information
5 Case Study of Large Complex Equipment Health Condition Assessment Based on ER Algorithm
6 Conclusion
References
Influence of the Modulus of Elasticity of the Jointed Material and Interlayers in Nodes with an Interlayer with a Low TCLE
1 Introduction
2 Experimental Details
3 Results and Discussion
3.1 The Stress Field in a Small Area Near the Interlayer and the Base Metal
3.2 Effect of Volume SSS on Strength and Plasticity of Material in Joint
4 Conclusions
References
Research on Aspect Ratio and Angle of Attack for Optimizing the Performance Of Airfoil NACA 24112
1 Introduction
2 Methodology
2.1 Geometric Model Creation of NACA 24112
2.2 Flow Simulation of NACA 24112 (Physical Model)
2.3 Mathematical Model
3 Results and Discussion
3.1 Result
3.2 Evaluation
4 Conclusion
References
Experimental Analysis of Viscous Damping Wall Based on Free Vibration Response
1 Introduction
2 Viscous Damping Wall Test
2.1 1Test Device
2.2 Test Process
3 Error Analysis
3.1 Error Sources
3.2 Filter Performance Verification
4 Analysis of Test Results
References
Design and Analysis of Turnover Function of Nursing Bed Based on Ergonomics
1 Introduction
2 Overall Design and Functional Distribution of Nursing Bed
3 Human Pressure Distribution Test
3.1 Test Method
3.2 Data Analysis
4 The Argument and Choice of Turning Over Way
5 Design of Axial Rollover
5.1 The Numerical Simulation
5.2 Linear Actuator Calculation Check
6 Simulation of Virtual Prototype
7 Conclusion
References
Cumulative Damage Study of Air-Dropped Vehicles with Multiple Drops Impact
1 Introduction
2 Airdrop Vehicle Analysis Process
2.1 Material Failure Model
2.2 Vehicle Drop Cumulative Damage Simulation Process
2.3 Finite Element Model Verification
3 Simulation of Multiple Drops of Airdrop Vehicles
3.1 Simulation Analysis of Cumulative Damage of Airdrop Vehicles from Multiple Falls
3.2 Analysis and Evaluation of Cumulative Damage Results
4 Conclusion
References
Research on Detonation Wave Analysis Model of Composite Charge
1 Introduction
2 Establish the Model of Composite Charge
3 Analysis of Propagation and Action of Detonation Wave in Composite Charge Structure
3.1 Pressure Distribution Area on the Surface of the Plate
3.2 Pressure Calculation on the Surface of the Plate
3.3 Detonation Waveform Difference
4 Simple Simulation Example
5 Conclusion
References
Influences of Element Types on Nonlinear Finite Element Analysis of a Concrete Column Under Near-Field Blast Loading
1 Introduction
2 Experiments
3 Modelling Set-up
3.1 Simplifications of Blast Loads
3.2 Modelling Set-up
4 Results and Discussion
5 Conclusion
References
Experimental Study on the Mitigation Effects of Water Mist on Quasi-Static Pressure
1 Introduction
2 Experimental Tests
2.1 Apparatus
2.2 Experimental Test Cases
3 Results and Discussion
4 Conclusion
References
Research on the Method of Compiling the Normalized Fatigue Load Spectrum of Motorized Transportation
1 Introduction
2 Research Status of Fatigue Load Spectrum Compilation Method
3 Research Status and Deficiency of Fatigue Load Spectrum of Structure Maneuvering Transportation
4 A Normalized Method for Compiling Standard Fatigue Test Spectra
4.1 Fatigue Load Spectrum Test Method for Missile Transportation
4.2 Preparation Method of the Normalized Standard Fatigue Test Spectrum
5 Conclusion
References
Research on the Reliability Design Method of the Typical Mechanism of Naval Gun Based on Failure Form
1 Introduction
2 The Working Mechanism of the Switch Latch Mechanism [6]
3 Latching and Unlatching Mechanism Failure Form Analysis
3.1 Latching and Unlatching Mechanism Failure Mode Effects Analysis
3.2 Latching and Unlatching Mechanism Failure Form Analysis
4 Reliability Design Based on Different Failure Forms
4.1 Reliability Design of Stiffness of Structural Parts
4.2 Design for Fatigue Reliability of Crank Arm
4.3 Latching and Unlatching Mechanism Motion Reliability Design
5 Conclusion
References
Computer Aided Mechanical Mechanism Design for Industrial Design
1 Introduction
2 Coding of Motion Mechanism
2.1 Network Model of Motion Mechanism
2.2 Matrix Expression of Kinematic Mechanism
3 Mechanism Innovation Design Based on Coding
4 Conclusion
References
Flex-Structural Embedded Flexible Strain Sensor via 3D Printing
1 Introduction
2 Design and Fabrication of Embedded Flex-Sensor Structure
3 Compression Testing Results and Discussions
4 Conclusion
References
Research on Parameter Identification of the Mechanical Model of Damping Wall Based on Free Vibration Response
1 Introduction
2 Introduction to Mechanical Model Identification Method
3 Analysis of Test Theory and Method
3.1 Derivation of Damping Force Calculation Formula Based on Energy Method
3.2 Butterworth Filter
3.3 Butterworth Low-Pass Filter Characteristics
3.4 Design of Butterworth Low-Pass Filter
3.5 Curve Fitting of Speed Damping Force Relationship
3.6 Analysis of Numerical Simulation Methods
4 Summary
References
Experimental Study on Electrical Discharge Precision Orbital Machining of Closed Impeller Based on Response Surface Optimization
1 Introduction
2 Research Object Analysis
3 Orbital Machining of the Leading Edge of the Blade
3.1 Orbiting Method Selection
3.2 Determination of Orbiting Axis
3.3 Orbital Machining Parameter Optimization
4 Orbital Machining of the Leading Edge of the Blade
4.1 Trial Machining of the Leading Edge of the Blade
5 Comparative Analysis of Test Results
6 Conclusion
References
Influence of Vibration on Noise Measurement and Correction Method
1 Introduction
2 Generation Mechanism of Vibration Noise
3 Vibration and Noise Test
3.1 Experimental Design
3.2 Test Implementation
3.3 Analysis of Measured Data
3.4 Test Conclusion
4 Test Data Correction
5 Conclusion
References
Research on Pre-tightening Force of Filament-Wound Composite Barrel of Railgun
1 Introduction
2 Pre-tightening Model of Railgun Composite Barrel
2.1 Overall Structure of the Composite Barrel
2.2 Finite Element Modeling of the Filament-Wound Layer
3 Analysis of the Pre-tightening Force of the Composite Barrel
3.1 Element Birth and Death Technology and Multi-step Continuous Solution Algorithm for Winding Process Simulation
3.2 Temperature Difference Method to Simulate Filament-Winding Tension
4 Equal-Strength Winding Theory
5 Determination of the Winding Tension of Each Layer
6 Analysis and Discussion of the Results of Applying Pre-tightening Force to the Barrel
6.1 When the Barrel isn’t Withstanding the Electromagnetic Expansion Force
6.2 When the Rail is Withstanding the Electromagnetic Expansion Force
7 Experiments and Results
7.1 Experiment Method
7.2 Tensile Test Results
7.3 Conclusion
References
A Study on the Outfield Application of Nondestructive Testing Technologies for Stealth Coating
1 Introduction
2 NDT Technologies for Coating Damage Detection
2.1 Ultrasonic Testing Techniques
2.2 Infrared Thermal Imaging Testing Technology
2.3 Laser Shearography
3 Analysis of the Applicability of NDT Technologies for Stealth Coating
3.1 Experiment with Infrared Thermal Imaging Testing Technology
3.2 Experiment with Phased Array Ultrasonic Testing Technology
3.3 Applicability Analysis
4 Conclusion
References
Simulation Analysis of the Maneuverability Limit of a Certain Type of Military Vehicle Based on Adams/Car Under Semi-Circular Obstacles
1 Introduction
2 Vehicle and Terrain Modeling
2.1 Adams/car-Based Modeling of the Entire Vehicle
2.2 Terrain Modeling
3 Experimental Validation
4 Vehicle Mobility Limit Simulation
5 Summary
References
An Extraction Method of Resistance Characteristics in Different Microchannels Using Numerical Method
1 Introduction
2 Micropipe Hydraulic Model
2.1 Pipeline Model
2.2 Continuous Media
2.3 Boundary Layer
2.4 Resistance
2.5 Other Effects
3 Numerical Simulation
3.1 Governing Equations
3.2 Governing Equations
3.3 Results and Discussion
4 Conclusions
References
Vibration Analysis of Airplane Wing Under Fuel Weight
1 Introduction
2 Model Definition
2.1 Geometry
2.2 Material Properties
2.3 Assumption
3 Analysis and Numerical Approach
3.1 Analysis Methods
3.2 Element Types
3.3 Boundary Conditions
4 Results
5 Discussions and Conclusion
5.1 Verification
5.2 Validation
6 Conclusion
References
Selection and Research of Common Waste Water Tank Mixer
1 Introduction
2 Working Condition
3 Speed of Mixer
4 Blade Type and Blade Diameter
5 Power of Mixer Motor
6 Diameter of Stirring Shaft
7 Conclusion
References
Study on Grease Elasto-Hydrodynamic Lubrication of Deep Groove Ball Bearings
1 Introduction
2 Point Contact EHL Analysis Model
3 Processing of Mathematical Models
3.1 Dimensionalization of Mathematical Model
3.2 Multigrid Solution Method
3.3 Numerical Method
4 Lubrication Performance Analysis of Bearings
5 Conclusion
References
Influence of Shock Load on Performance of Mixed Lubrication Sliding Bearings
1 Introduction
2 Mathematical Model
2.1 Average Flow Reynolds Model
2.2 Roughness Peak Contact Model
2.3 Fluid Film Thickness Equation
2.4 Rotor Kinetics Equation
3 Numerical Calculation
4 Model Verification
5 Result Discussion
6 Conclusion
References
Experimental Study on Direct Measurement of the Air–Water Interface at High-Speed Condition
1 Introduction
2 Direct Measurement of Two-Phase Flow
2.1 Model Test
2.2 Test Device
2.3 Two-Phase Flow Height
3 Model Test
4 Conclusions
References
Experimental Study on Fatigue Life of Four Typical Aircraft Connectors
1 Introduction
2 Test Specimen and Test System
2.1 Test Piece Structure
2.2 Test System
3 Static Tensile Test
3.1 Static Tensile Test Procedure
3.2 Static Tensile Test Results
4 Fatigue Test
4.1 Fatigue Test Process
4.2 Fatigue Test Results
4.3 Specimen Fracture Surface
5 S–N Model
5.1 Flat Head Hi-Lock Bolt Test Piece
5.2 Comparison of Flat Head and Countersunk Head Hi-Lock Bolt Specimens
5.3 Blind Rivets and Solid Rivets
5.4 Comparison of Blind Rivets and Solid Rivets
5.5 Comparison of High-Lock Bolt Specimens and Rivet Specimens
6 Conclusion
References