## Abstract This study evaluated the Young's modulus, residual stress and strain, bonding strength, and microstructure of the plasma‐sprayed hydroxyapatite coating (HAC) on Ti6Al4V substrate with and without immersion in Hank's balanced salt solution (HBSS). The purpose was to explore the possible
Reactivity of plasma-sprayed wollastonite coating in simulated body fluid
✍ Scribed by Liu, Xuanyong ;Ding, Chuanxian
- Publisher
- John Wiley and Sons
- Year
- 2001
- Tongue
- English
- Weight
- 612 KB
- Volume
- 59
- Category
- Article
- ISSN
- 0021-9304
- DOI
- 10.1002/jbm.1240
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
We incubated wollastonite coatings prepared with plasma spraying in simulated body fluids for different periods to investigate the reactivity. The surface structures of wollastonite coatings immersed in simulated body fluids were analyzed with scanning electron microscopy, Auger electron spectroscopy, and transmission electron microscopy. The results showed a carbonate‐containing hydroxyapatite layer formed on the surface of a plasma‐sprayed wollastonite coating soaked in simulated body fluids, and a silica‐rich layer appeared on the surface of the coating before the formation of the carbonate‐containing hydroxyapatite layer. The formation mechanism of apatite on the coating surface could be explained in terms of the ionic exchange between H^+^ within simulated body fluids and Ca^2+^ in the coating, which resulted in an increase in the ionic activity product of the apatite in simulated body fluids and provided a specific surface with a lower interface energy to the formation of apatite nuclei. © 2001 Wiley Periodicals, Inc. J Biomed Mater Res 59: 259–264, 2002
📜 SIMILAR VOLUMES
In vitro test in simulated body fluid Fine, hydroxyapatite (HA) powder, synthesized using calcium nitrate and diammonium nitrate was formulated with water and alcohol to obtain a suspension used to plasma spray coatings onto titanium substrates. The deposition process was optimized using statistical
Wollastonite/tricalcium phosphate composites were prepared and immersed in SBF for various periods to investigate the apatite-formation mechanism on their surfaces. Surface morphologies and composition before and after immersion were analyzed by SEM and EDS technologies. The concentration changes of