𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Reaction and thermal analysis for SMC (sheet molding compound) molding in complicated geometries

✍ Scribed by Ching-Chih Lee

Publisher
Society for Plastic Engineers
Year
1989
Tongue
English
Weight
687 KB
Volume
29
Category
Article
ISSN
0032-3888

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Dimensional stability and property gradi
Dimensional stability and property gradients in thick sheet molding compound (SMC) sections
✍ H. T. Kau; L. A. Petrusha πŸ“‚ Article πŸ“… 1990 πŸ› Society for Plastic Engineers 🌐 English βš– 693 KB

## Abstract The dimensional stability of sample cylinders cured with sheet molding compound pastes was investigated. A significant amount of dimensional change was found for these samples when they were annealed. Furthermore, the amount of change varied with location from the center to the wall alo

Temperature increase of sheet molding co
Temperature increase of sheet molding compound (SMC-R65) in flexural fatigue test
✍ S. V. Hoa; Q. B. Nguyen πŸ“‚ Article πŸ“… 1983 πŸ› Society for Plastic Engineers 🌐 English βš– 406 KB

## Abstract The temperature increase in flexural fatigue testing of sheet‐molding compound SMC‐R65 is investigated within a range of testing frequencies from 1000 cpm to 2200 cpm. Variation of the testing frequency affects the temperature increase and, based on 10 percent reduction in flexural stif

Analysis of the thickening reaction of a
Analysis of the thickening reaction of a sheet molding compound resin through the use of dynamic mechanical testing
✍ M. Gruskiewicz; J. Collister πŸ“‚ Article πŸ“… 1982 πŸ› Society for Plastic Engineers 🌐 English βš– 399 KB

## Abstract The change in viscoelastic response of an unsaturated polyester during the course of thickening with magnesium oxide was evaluated, Rheological measurements were obtained to describe the effects of thickening as functions of time and magnesium oxide concentration. Previous researchers h