✦ LIBER ✦

Rapid Prototyping of Ceramic Components

✍ Scribed by R. Lenk

Publisher: John Wiley and Sons
Year: 2000
Tongue: English
Weight: 334 KB
Volume: 2
Category: Article
ISSN: 1438-1656
DOI: 10.1002/(sici)1527-2648(200002)2:1/2<40::aid-adem40>3.0.co;2-z

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Rapid laser prototyping of plasmonic com

Rapid laser prototyping of plasmonic components

✍ C. Reinhardt; R. Kiyan; S. Passinger; A.L. Stepanov; A. Ostendorf; B.N. Chichkov 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 318 KB

Rapid prototyping machine based on ceram

Rapid prototyping machine based on ceramic laser fusion

✍ Hwa Hsing Tang; Fwu Hsing Liu; Wen Hsiang Lin 📂 Article 📅 2005 🏛 Springer 🌐 English ⚖ 246 KB

Rapid prototyping of ceramic millimeterw

Rapid prototyping of ceramic millimeterwave metamaterials: Simulations and experiments

✍ Yoonjae Lee; Xuesong Lu; Yang Hao; Shoufeng Yang; Rich Ubic; Julian R. G. Evans; 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 359 KB

## Abstract Rapid prototyping by an extrusion freeforming technique, of ceramic metamaterials based on a woodpile structure at millimeterwave frequencies has been performed. The finite difference time domain technique is applied for the design and characterization of the proposed metamaterials. The

Manufacturing of Ceramic Microcomponents

Manufacturing of Ceramic Microcomponents by a Rapid Prototyping Process Chain

✍ R. Knitter; W. Bauer; D. Göhring; J. Haußelt 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 512 KB

Rapid prototyping of electrically conduc

Rapid prototyping of electrically conductive components using 3D printing technology

✍ J. Czyżewski; P. Burzyński; K. Gaweł; J. Meisner 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 574 KB

A method of rapid prototyping of electrically conductive components is described. The method is based on 3D printing technology. The prototyped model is made of plaster-based powder bound layer-by-layer by an inkjet printing of a liquid binder. The resulting model is highly porous and can be impregn

Fabrication of meso-scale underwater veh

Fabrication of meso-scale underwater vehicle components by rapid prototyping process

✍ Yih-Lin Cheng; Jia-Hung Lai 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 875 KB

Underwater vehicles have been developed in many ocean exploration and rescue applications. In smaller scale of underwater vehicles, critical components are not usually commercially available. The cost of non-standard parts is relatively high in the development stage if special molding or precision m