𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Rapid and selective removal of composite from tooth surfaces with a 9.3 µm CO2 laser using spectral feedback

✍ Scribed by Kenneth H. Chan; Krista Hirasuna; Daniel Fried


Publisher
John Wiley and Sons
Year
2011
Tongue
English
Weight
554 KB
Volume
43
Category
Article
ISSN
0196-8092

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

Objective

Dental composite restorative materials are color matched to the tooth and are difficult to remove by mechanical means without excessive removal or damage to peripheral enamel and dentin. Lasers are ideally suited for selective ablation to minimize healthy tissue loss when replacing existing restorations, sealants, or removing composite adhesives such as residual composite left after debonding orthodontic brackets.

Methods

In this study, a carbon dioxide laser operating at 9.3‐µm with a pulse duration of 10–20‐microsecond and a pulse repetition rate of ∼200 Hz was integrated with a galvanometer based scanner and used to selectively remove composite from tooth surfaces. Spectra of the plume emission were acquired after each laser pulse and used to differentiate between the ablation of dental enamel or composite. Microthermocouples were used to monitor the temperature rise in the pulp chamber during composite removal. The composite was placed on tooth buccal and occlusal surfaces and the carbon dioxide laser beam was scanned across the surface to selectively remove the composite without excessive damage to the underlying sound enamel. The residual composite and the damage to the underlying enamel was evaluated using optical microscopy.

Results

The laser was able to rapidly remove composite from tooth buccal and occlusal surfaces with minimal damage to the underlying sound enamel and without excessive heat accumulation in the tooth.

Conclusion

This study demonstrated that composite can be selectively removed from tooth surfaces at clinically relevant rates using a CO~2~ laser operating at 9.3‐µm with high pulse repetition rates with minimal heat deposition and damage to the underlying enamel. Lasers Surg. Med. © 2011 Wiley‐Liss, Inc.


📜 SIMILAR VOLUMES


Selective removal of residual composite
✍ Robert Alexander; John Xie; Daniel Fried 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 102 KB

## Abstract ## Background and Objective Conventional methods of residual composite removal after the debonding of orthodontic brackets involve the use of abrasives that damage the underlying enamel. The objective of this study was to demonstrate that 355‐nm laser pulses with a pulse width of 10 ns