Radiation shielding for neutron guides

✍ Scribed by T. Ersez; G. Braoudakis; J.C. Osborn

• Publisher: Elsevier Science
• Year: 2006
• Tongue: English
• Weight: 150 KB
• Volume: 385-386
• Category: Article
• ISSN: 0921-4526
• DOI: 10.1016/j.physb.2006.06.028

✦ Synopsis

Models of the neutron guide shielding for the out of bunker guides on the thermal and cold neutron beam lines of the OPAL Reactor (ANSTO) were constructed using the Monte Carlo code MCNP 4B. The neutrons that were not reflected inside the guides but were absorbed by the supermirror (SM) layers were noted to be a significant source of gammas. Gammas also arise from neutrons absorbed by the B, Si, Na and K contained in the glass. The proposed shielding design has produced compact shielding assemblies. These arrangements are consistent with safety requirements, floor load limits, and cost constraints. To verify the design a prototype was assembled consisting of 120 mm thick Pb(96%)Sb(4%) walls resting on a concrete block. There was good agreement between experimental measurements and calculated dose rates for bulk shield regions.