✦ LIBER ✦

Radiation-induced graft polymerization of methyl methacrylate onto ultrahigh molecular weight polyethylene in the presence of a metallic salt and acid

✍ Scribed by Oh Hyun Kwon; Young Chang Nho

Publisher: John Wiley and Sons
Year: 2002
Tongue: English
Weight: 185 KB
Volume: 86
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.11266

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Graft polymerization of methyl methacryl

Graft polymerization of methyl methacrylate onto radiation-peroxidized ultrahigh molecular weight polyethylene in the presence of metallic salt and acid

✍ Oh Hyun Kwon; Young Chang Nho; J. H. Jin; M. J. Lee; Y. M. Lee 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 209 KB 👁 2 views

Using a radiation peroxide grafting technique, a ultrahigh molecular weight polyethylene (UHMWPE) stored at room temperature for 10 days after irradiation in air was graft copolymerized with methyl methacrylate (MMA) in the presence of metallic salt and acid. The MMA-grafted UHMWPE samples were anal

Graft polymerization of acrylic acid and

Graft polymerization of acrylic acid and methacrylic acid onto radiation-peroxidized polyethylene film in presence of metallic salt and sulfuric acid

✍ Young Chang Nho; Joon-Ha Jin 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 144 KB 👁 3 views

Using the radiation peroxide grafting technique, a low density polyethylene film was graft copolymerized with acrylic acid and methacrylic acid in the presence of additives such as acid and metallic salts. The effect of acid and metallic salts on the grafting yield and reaction mechanisms were exami

The grafting of methyl methacrylate onto

The grafting of methyl methacrylate onto ultrahigh molecular weight polyethylene fiber by plasma and UV treatment

✍ Jen-Ming Yang; Pai-Yao Huang; Ming-Chien Yang; Winston Wang 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 162 KB 👁 2 views

In this study, ultrahigh molecular weight polyethylene (UHMWPE) fibers were treated with a gas plasma of argon for 5 min. The plasma-treated UHMWPE fibers were put into a methyl methacrylate solution with n-hexane or chloroform as the solvent and irradiated with a UV lamp. The UV irradiation time wa