Radiation-induced emulsion polymerization of vinyl acetate and styrene

✍ Scribed by V. Stannett; J. A. Gervasi; J. J. Kearney; K. Araki

• Publisher: John Wiley and Sons
• Year: 1969
• Tongue: English
• Weight: 801 KB
• Volume: 13
• Category: Article
• ISSN: 0021-8995
• DOI: 10.1002/app.1969.070130607

✦ Synopsis

Studies have been made of the 7-induced emulsion polymerization of styrene and comparisons made with chemically initiated emulsion polymerization. The polymerization proceeded smoothly to high conversions at 0 and 60°C, the reaction showing a high G (monomer) value. Complete conversions were obtained with total doses of less than 0.05 Mrad. In accordance with the behavior expected of systems having a constant rate of initiation, the molecular weight was found to decrease with decreasing temperature. The molecular weight and particle size distributions were narrower than those obtained in chemically initiated emulsion polymerizations at the same temperature. The radiation-induced emulsion polymerization of vinyl acetate proceeded smoothly at temperatures in the range 0-50°C to give polymers of much higher molecular weight than these obtained from chemically initiated polymerizations a t the same temperature. Complete conversion was attained after a dose of 0.02 Mrad for latices approaching 50% solids. The elimination of ionic endgroups in the poly(viny1 acetate) radicals tends to drive the polymerization from the aqueous phase, resulting in faster rates and higher molecular weights than are obtained from chemically initiated systems. Rates of polymerization were found to be independent of temperature and the molecular weight of the polymer to be independent of dose rate. Latices of poly(viny1 acetate) of high solids content were evaluated for latex and film properties and found to have improvements over commercially available samples in both areas, especially in clarity of film and scrub resistance. A number of acrylate and maleate esters were copolymerized with vinyl acetate in a radiation-initiated emulsion system. High molecular weight copolymers were produced after low dose.