𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Radiation effects on polymers—XI. Radiation grafting of acrylamide on to cellulose acetate reverse osmosis membranes

✍ Scribed by N.A. Ghanem; N.I. El-Awady; K. Singer; M.I. Aly

Publisher
Elsevier Science
Year
1979
Tongue
English
Weight
450 KB
Volume
15
Category
Article
ISSN
0014-3057

No coin nor oath required. For personal study only.

✦ Synopsis

With the aim of improving properties of cellulose acetate membranes for reverse osmosis desalination, grafting was performed using high energy electrons. In this paper, the grafting parameters (radiation dose and method, monomer concentration, solvents, chain transfer agent and redox system) are considered; conclusions are drawn as to the grafting content and mode of grafting.

📜 SIMILAR VOLUMES

Radiation effects on polymers—XIII. The
Radiation effects on polymers—XIII. The application of cellulose acetate-g-polyacrylamide membranes in the process of water desalination by reverse osmosis
✍ N.I. El-Awady; N.A. Ghanem; P. Bo; K. Singer 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 550 KB

Using computerized programs, the water flux and salt rejection properties in reverse osmosis of cellulose acetate-o-acrylamide membranes are determined. Comparisons are made with ungrafted commercial cellulose acetate membranes, using 0.1 and 1.0 M sodium chloride, sodium sulphate and ammonium sulph

Annealing effect of cellulose acetate me
Annealing effect of cellulose acetate membranes on ethanol and glucose reverse osmosis separation
✍ Maria Norberta De Pinho 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 376 KB

Annealing profiles are determined for two sets of cellulose acetate membranes originating from two different casting solution compositions under different casting conditions. The two sets of membranes are characterized by two normal pore size distributions. Membranes exhibiting a narrower gap betwee

Effect of casting conditions on the perf
Effect of casting conditions on the performance of porous cellulose acetate membranes in reverse osmosis
✍ B. Kunst; S. Sourirajan 📂 Article 📅 1970 🏛 John Wiley and Sons 🌐 English ⚖ 553 KB

Several sets of porous cellulose acetate membranes were made using the same casting solution composition and gelation conditions but varying the casting solution temperature and solvent evaporation conditions. The films were tested in reverse osmosis experiments at 250 psig using aqueous feed soluti

Radiation-induced graft copolymerization
Radiation-induced graft copolymerization of mixtures of styrene and acrylamide onto cellulose acetate. V. Studies on thermal behavior
✍ S. N. Bhattacharyya; D. Maldas 📂 Article 📅 1985 🏛 John Wiley and Sons 🌐 English ⚖ 324 KB 👁 2 views

The thermal behaviors of cellulose acetate, either grafted or ungrafted, were studied. A thermogram of cellulose acetate when grafted with acrylamide is characterized by an endothermic peak at 340°C. If, however, styrene is grafted, the thermogram shows two characteristic exothermic peaks at 330 and