## Abstract This paper presents the design of a wideband corrugated multisectional conical horn using a genetic algorithm (GA). The GA optimizes the length, flare angle, and first slot depth of each section of the horn in order to match the admittance, reduce the voltage standing wave ratio (VSWR)
Radiation characteristics of a corrugated horn antenna
โ Scribed by Mohammed N. Afsar; Yong Wang
- Publisher
- John Wiley and Sons
- Year
- 2002
- Tongue
- English
- Weight
- 91 KB
- Volume
- 34
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
โฆ Synopsis
Abstract
A corrugated horn antenna is modeled using the threeโdimensional FDTD method. The computed Eโplane radiation pattern shows a good agreement with those measured and calculated using the MoM published in the literature. The Hโplane radiation pattern and the crossโpolarization patterns for both Eโ and Hโplane are also obtained since the corrugated horn is calculated by a three dimensional model. The radiation characteristics for various frequencies have also been analyzed. ยฉ 2002 Wiley Periodicals, Inc. Microwave Opt Technol Lett 34: 83โ84, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.10379
๐ SIMILAR VOLUMES
## Abstract In this study, a dielectric corrugated antenna, as being a feed horn antenna of the reflector antenna for satellite communication applications, is analyzed. The structure consists of a conical dielectric corrugated antenna terminated with a conductor hyperbolic (convex) plate. The anten
## Abstract The Genetic Algorithm (GA) optimization technique is applied to the optimization of a profiled corrugated horn, designed as a feed for a spaceโborne remote sensing reflectorโantenna system. In addition to using the standard GA (SGA) optimization technique, a profiled corrugated horn is