An innovative way of catalysis was investigated for its potential to reduce the amount of condensable hydrocarbons produced during the pyrolysis of oak wood. The experiments were carried out in a horizontal tubular reactor, fed with a controlled flow rate of nitrogen and equipped with accessories to collect char, liquid and gaseous products. Pyrolysis was performed at 700 8C with different wood sample series impregnated with either Ni or Fe nitrates (in aqueous solution) and by varying the metal concentration in the wood. In the blank run the biomass was acid-washed to determine the impact of demineralization. The influence of the metal type and content introduced into the wood to reduce the fraction of condensable organic compounds produced during pyrolysis was determined.
Depending on the experimental conditions, the gas yield increases from 20.0 to 33.1%. Condensable hydrocarbons are cracked into gaseous components and the concentration of H 2 is significantly increased, by 260% compared to the reference sample. In particular, the Ni-loaded wood samples give much higher H 2 yields than the Fe-loaded ones under similar conditions but less toxic products are formed with the latter. These results show that biomass impregnation with either nickel or iron salts is a promising way to reduce the fraction of condensable organic compounds produced during pyrolysis.