𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Pulsed electric current sintering and characterization of ultrafine Al2O3–WC composites

✍ Scribed by Shuigen Huang; Kim Vanmeensel; Omer Van der Biest; Jef Vleugels

Publisher
Elsevier Science
Year
2010
Tongue
English
Weight
869 KB
Volume
527
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Sintering and characterization of Al2O3-
Sintering and characterization of Al2O3-TiB2 composites
✍ Isao Kimura; Noriyasu Hotta; Yukio Hiraoka; Natsukaze Saito; Yuji Yokota 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 476 KB

## A bstra ct AI203-TiB 2 composites containing 0-50 wt% TiB 2 were prepared by sintering at 1600-1750°C ,for 15-120min in a vacuum. Relative density increased with TiB 2 addition from 97% (no TiB2) to about 99% ( lO-40wt% TiB2) on sintering at 1750°C Jbr 60 min. TiB 2 behaved as a sintering aid t

The Microstructural Effects on the Mecha
The Microstructural Effects on the Mechanical and ThermalProperties of Pulsed Electric Current Sintered Cu-Al2O3 Composites
✍ R. Ritasalo; X.W. Liua; O. Söderberg; A. Keski-Honkola; V. Pitkänen; S-P. Hannul 📂 Article 📅 2011 🏛 Elsevier 🌐 English ⚖ 943 KB

In this work, the influences of the microstructure on the mechanical and thermal properties of pulsed electric current sintered (PECS) Cu-Al 2 O 3 composites are investigated. The process parameters were optimized for four different grades of composite powders to obtain dense samples (98-99.6 %T.D.)