𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Prospects for using carbon-fiber reinforced plastics in pump construction

✍ Scribed by V. V. Berezovskii; B. I. Molchanov; T. N. Polyakova; P. A. Chukalovskii

Publisher
Springer
Year
1981
Tongue
English
Weight
423 KB
Volume
17
Category
Article
ISSN
0009-2355

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Fatigue damage monitoring in carbon fibe
Fatigue damage monitoring in carbon fiber reinforced polymers using the acousto-ultrasonics technique
✍ T.H. Loutas; A. Vavouliotis; P. Karapappas; V. Kostopoulos πŸ“‚ Article πŸ“… 2009 πŸ› Society for Plastic Engineers 🌐 English βš– 572 KB

## Abstract This study focuses on the nondestructive monitoring of damage developed in carbon fiber reinforced polymers during fatigue loading via in situ acousto‐ultrasonics (AU) measurements. Carbon nanotubes (CNTs) were used as modifiers of the epoxy matrix of quasi‐isotropic carbon fiber reinfo

Use of submicron diameter carbon filamen
Use of submicron diameter carbon filaments for reinforcement between continuous carbon fiber layers in a polymer-matrix composite
✍ Steven W. Hudnut; D.D.L. Chung πŸ“‚ Article πŸ“… 1995 πŸ› Elsevier Science 🌐 English βš– 454 KB

The incorporation of 0.1-0.2 pm diameter carbon filaments (0.6 vol.%) between continuous carbon fiber (7 pm diameter, 56.5 vol.%) layers in an epoxy-matrix composite during composite fabrication was found under flexure to greatly increase transverse and longitudinal tan 6 values, increase the storag