𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Properties of Ni-W alloy coatings on steel substrate

✍ Scribed by Z. Gáliková; M. Chovancová; V. Danielik

Book ID
111490991
Publisher
Versita
Year
2006
Tongue
English
Weight
476 KB
Volume
60
Category
Article
ISSN
0366-6352

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Ni-W alloy coatings were prepared on the steel substrate at the temperature of 60°C. The content of tungsten in coatings was increased with the growing cathodic current density. The increase of the corrosion resistance of Ni-W alloy coatings with the rising content of tungsten was confirmed by the measurement of anodic polarization curves. Annealed coatings showed better antioorrosion properties than the non-annealed ones. The properties of annealed coatings including their corrosion resistance depend on the tungsten content, too.

📜 SIMILAR VOLUMES

Elastic properties of Ni and Ni +&#
Elastic properties of Ni and Ni + Mo coatings electrodeposited on stainless steel substrate
✍ M. Kubisztal; J. Kubisztal; A. Chrobak; G. Haneczok; A. Budniok; J. Rasek 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 791 KB

Adhesion coefficient and Young's modulus of Ni and Ni + Mo coatings electrochemically deposited on stainless steel were examined by applying vibrating reed technique. It was shown that adhesion coefficient of the Ni coating slightly decreases (about 8%) with increasing layer thickness (5-40 μm). You