✦ LIBER ✦

Properties of epoxy-modified YBCO superconductors

✍ Scribed by G. Mohazzab-H; I. M. Low

Publisher: John Wiley and Sons
Year: 1995
Tongue: English
Weight: 215 KB
Volume: 56
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.1995.070561220

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Properties of YBCO obtained by modified

Properties of YBCO obtained by modified hydroxycarbonate method

✍ L. Ciontea; T. Petrisor; V. Boffa 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 522 KB

YBCO was synthesized by the co-precipitation of stoichiometric amounts of nitrate solutions of Y, Ba and Cu using a mixture of NaOH, Na 2 CO 3 and H 2 C 2 O 4 in a molar ratio of 5:1:1 as a precipitation agent. Even after prolonged thermal treatment at 950 • C the samples exhibit a zero-resistance c

Bulk properties of epoxy resin modified

Bulk properties of epoxy resin modified by epoxy-aminosilane copolymers

✍ Lu, M G; Shim, M J; Kim, S W 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 577 KB

A linear epoxy±aminopropyltriethoxysilane addition polymer was used as a new epoxy modi®er. In this paper, the thermal and mechanical properties have been determined by differential scanning calorimetry (DSC) and mechanical testing. The experimental results show that this copolymer modi®er can effec

Effect of oxide dopants on the supercond

Effect of oxide dopants on the superconducting properties of YBCO superconductor

✍ S.H. Lee; Y. Choi 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 543 KB

Intergranular properties of YBCO and BSC

Intergranular properties of YBCO and BSCCO ceramic superconductors at low fields

✍ L.A. Angurel; F. Lera; C. Rillo; R. Navarro 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 703 KB

Preparation and properties of polydimeth

Preparation and properties of polydimethylsiloxane-modified epoxy resins

✍ Feng Zhao; Qingchi Sun; Dong Pu Fang; Kang De Yao 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 271 KB 👁 2 views

In this work, polydimethylsiloxane (PDMS) with different molecular weight were used to modify diglycidyl ether of bisphenol A (DGEBA). A PDMS-block-DGEBA copolymer that acted as a compatibilizer was prepared via DGEBA, hydroxy terminated PDMS, and silane coupling agent in the presence of a catalyst.

Morphology and properties of polydimethy

Morphology and properties of polydimethylsiloxane-modified epoxy resin

✍ S. S. Lee; S. C. Kim 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 575 KB

The morphology and fracture toughness of epoxy resins modified with amino-terminated polydimethylsiloxane (ATPDMS), differing in their molecular weight, and the degree of the preliminary reaction in the melt state were investigated. Tetramethyl biphenol diglycidyl ether (TMBPDGE) was used as the bas