𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Properties of alkyl esters base on castor oil

✍ Scribed by Ján Cvengroš; Jarmila Paligová; Zuzana Cvengrošová


Publisher
John Wiley and Sons
Year
2006
Tongue
English
Weight
159 KB
Volume
108
Category
Article
ISSN
1438-7697

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Some physical properties of castor oil e
✍ Mangesh G. Kulkarni; Sudhirprakash B. Sawant 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 112 KB

## Abstract Esters of castor oil and hydrogenated castor oil were prepared with C~6~, C~12~, C~16~, C~18~ fatty acids, using tetra‐__n__‐butyl titanate as a catalyst and __n__‐butyl benzene as a water entrainer. Physical properties such as melting point, refractive index, viscosity, and specific gr

Polyurethanes Based on Castor Oil: Kinet
✍ Elodie Hablot; Dan Zheng; Michel Bouquey; Luc Avérous 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 224 KB

## Abstract Polyurethanes based on vegetable oil were synthesized with castor oil and toluene diisocyanate, isophorone diisocyanate or hexamethylene diisocyanate, using dibutyltin dilaurate as a catalyst. The effects of the nature of the diisocyanate on the evolution of the kinetics, as well as the

Cast Polyurethanes Based on Castor Oil a
✍ Ramesh, S.; Mahesh, G. N.; Subramanian, K. A.; Radhakrishnan, Ganga 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 254 KB 👁 1 views

Cast polyurethanes based on castor oil, Ñuorescein and tolylene diisocyanate have been synthesized. The polyurethanes were characterized by Fourier transform infrared spectroscopy. The thermal stabilities of the polymers were determined using a thermogravimetric analyser. From the di †erential scann

Film-forming properties of castor oil–po
✍ Grigor B. Bantchev; Girma Biresaw 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 234 KB

## ABSTRACT The viscosity and elastohydrodynamic (EHD) film thickness properties of binary blends of castor oil with polyol esters were determined experimentally. Predicted blend viscosities were calculated from the viscosities of the pure blend components. Measured viscosity values were closer to