✦ LIBER ✦

Properties of a new thermoplastic fluorinated polymer

✍ Scribed by C. Garbuglio; M. Modena; M. Valera; M. Ragazzini

Publisher: Elsevier Science
Year: 1974
Tongue: English
Weight: 292 KB
Volume: 10
Category: Article
ISSN: 0014-3057
DOI: 10.1016/0014-3057(74)90056-1

No coin nor oath required. For personal study only.

✦ Synopsis

The properties of a new thermoplastic polymer, tetrafluoroethylene-ethylene copolymer (TE) are reported. It is a crystalline thermoplastic melting around 275: and contains essentially alternating monomer units with minor amounts of additional perfluorinated units. The copolymer has excellent mechanical properties both at low and high temperature:it exhibits moderate stiffness, good toughness and good creep behaviour. Dielectric constant and toss factor are low; chemical, thermal and weather resistance are good. TE is particularly suited for extrusion applications, especially for electrical insulation purposes and for chemical applications.

📜 SIMILAR VOLUMES

Some mechanical properties of particulat

Some mechanical properties of particulate-filled thermosetting and thermoplastic polymers

✍ M. Narkis 📂 Article 📅 1976 🏛 John Wiley and Sons 🌐 English ⚖ 508 KB

Hai f a, Isra e 1 ## Synopsis A semiempirical, single-parameter equation describes the modulus of particulate systems This equation has been found applicable for thermoplastic/glass bead systems, and it is further verified for particulate thermosetting systems (epoxy and polyester matrices). The

Synthesis and Properties of New Fluorina

Synthesis and Properties of New Fluorinated Peptidomimetics

✍ Monica Sani; Marco Molteni; Luca Bruche; Alessandro Volonterio; Matteo Zanda 📂 Article 📅 2007 🏛 John Wiley and Sons ⚖ 11 KB

Prediction of mechanical properties of p

Prediction of mechanical properties of polymers. Tensile strength of several thermoplastics

✍ Elise McAbee; David W. Levi 📂 Article 📅 1967 🏛 John Wiley and Sons 🌐 English ⚖ 231 KB 👁 2 views

Tensile strength data for five thermoplastics [polycarbonate, phenoxy, poly(methy1 methacrylate), polyethylene, and ethyl cellulose] are analyzed according to a modified rate equation. The agreement of the test results with the behavior described by the equation is excellent. Treatment of this type

On the surface properties of waterborne

On the surface properties of waterborne fluorinated coating polymers

✍ Valter Castelvetro; Francesco Ciardelli; Giorgia Francini; Piero Baglioni 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 203 KB 👁 2 views

SEM micrograph of the film obtained upon simple casting of latex Ol-C

Thermal properties of a thermoplastic po

Thermal properties of a thermoplastic polyimide blend

✍ A. A. Goodwin 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 199 KB 👁 2 views

Differential scanning calorimetry and dynamic mechanical analysis of blends of a new thermoplastic polyimide (TPI) and poly(ether imide) (PEI) have confirmed the full miscibility of the system over the whole composition range. Annealing of the blends above the glass transition temperature of TPI, bu

Optical and electrical properties of a n

Optical and electrical properties of a new polymer

✍ Lamies Shahada; M. E. Kassem; H. I. Abdelkader; H. M. Hassan 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 158 KB 👁 2 views

Thin film of poly(5-isopropylidenecyclo-1,4-vinylene-2,3-dicarboxylicacidamide-s-methyl hydrazinecarbodithioate) (II) (Scheme 1 ) of 5 mm thickness was prepared. The dielectric properties of the prepared sample were studied as a function of frequency and temperature, and the results were analyzed by