✦ LIBER ✦

Properties of a hydrophone produced with porous PZT ceramic

✍ Scribed by K. Boumchedda; M. Hamadi; G. Fantozzi

Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 534 KB
Volume: 27
Category: Article
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2007.02.124

No coin nor oath required. For personal study only.

✦ Synopsis

Interconnected piezoelectric porous ceramics PZT have been tested for possible use in hydrophone applications. These materials consisted of:

(1) ceramics with fine porosity having pores from 50 to 100 m and (2) cellular ceramics having cavities of the order of the millimeters. Porous ceramics are coated with flexible polymer standard polyurethane for the hydrostatics tests. The effect of the size of the pores and porous volume on the sensitivity of the sensor is studied and the performances of the hydrophones devices are presented.

📜 SIMILAR VOLUMES

The effects of sintering behavior on pie

The effects of sintering behavior on piezoelectric properties of porous PZT ceramics for hydrophone application

✍ Tao Zeng; Xian Lin Dong; Heng Chen; Yong Lin Wang 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 400 KB

Preparation and properties of porous PMN

Preparation and properties of porous PMN–PZT ceramics doped with strontium

✍ Tao Zeng; XianLin Dong; ChaoLiang Mao; ShuTao Chen; Heng Chen 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 580 KB

Osteoinductivity and biomechanics of a p

Osteoinductivity and biomechanics of a porous ceramic with autogenic periosteum

✍ Cong, Zhang ;Jianxin, Wang ;Xingdong, Zhang 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 464 KB

Effect of sintering temperature on micro

Effect of sintering temperature on microstructure and mechanical properties of highly porous silicon nitride ceramics produced by freeze casting

✍ Feng Ye; Jingyi Zhang; Haijiao Zhang; Limeng Liu 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 481 KB

Highly porous Si 3 N 4 with macroscopically aligned pores were prepared by the unidirectional freeze casting process using liquid N 2 as refrigerant. The increased sintering temperature had no obvious influence on the porosity, but significantly promoted ␣ → ␤-Si 3 N 4 phase transformation and the g

Effect of solid content on pore structur

Effect of solid content on pore structure and mechanical properties of porous silicon nitride ceramics produced by freeze casting

✍ Feng Ye; Jingyi Zhang; Limeng Liu; Haijiao Zhan 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 875 KB

97/03144 A kind of porous ceramic with c

97/03144 A kind of porous ceramic with controlled poresize distribution

📂 Article 📅 1997 🏛 Elsevier Science ⚖ 198 KB

The dry mixture that results from the blending of iron-rich oxide dust and other such wastes carbonaceous material is heated to release the volatiles with agglomeration. It is subsequently loaded into a preheated furnace with rotary hearth and heated for 5-12 min at 2150-2350°F for smelting and disc