✦ LIBER ✦

Properties and morphology of poly(L-lactide)/clay composites according to the clay modification

✍ Scribed by Jae Hun Shim; Eung Soo Kim; Jung Hiuk Joo; Jin San Yoon

Publisher: John Wiley and Sons
Year: 2006
Tongue: English
Weight: 337 KB
Volume: 102
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.24900

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Structure and thermal/mechanical propert

Structure and thermal/mechanical properties of poly(l-lactide)-clay blend

✍ Nobuo Ogata; Guillermo Jimenez; Hidekazu Kawai; Takashi Ogihara 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 180 KB 👁 2 views

Organophilic montmorillonite was obtained by the reaction of montmorillonite (MON) and distearyldimethylammonium chloride (DSAC). The modified clay and poly( l-lactide), (PLLA), were solvent-cast blended using chloroform as cosolvent. The structure and properties of the PLLA-clay blends were investi

The Effect of Clay Loading on the Morpho

The Effect of Clay Loading on the Morphology and Properties of Poly(styrene-co-butyl acrylate)/Clay Nanocomposites

✍ Nagi Greesh; Patrice C. Hartmann; Ronald D. Sanderson 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 413 KB

## Abstract This paper investigates the effect of both the clay loading and the monomer feed rate on the morphology and properties of poly(styrene‐__co__‐butyl acrylate)‐clay nanocomposites prepared in emulsion polymerization. Analysis by X‐ray diffraction (XRD) and transmission electron microscopy

Composites of poly(L-lactide) with hemp

Composites of poly(L-lactide) with hemp fibers: Morphology and thermal and mechanical properties

✍ Robert Masirek; Zbigniew Kulinski; Donatella Chionna; Ewa Piorkowska; Mariano Pr 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 791 KB

## Abstract Composites of poly(L‐lactide) (PLA) with hemp fibers (__Cannabis sativa__), prepared by batch mixing and plasticized with poly(ethylene glycol) (PEG; weight‐average molecular weight = 600 g/mol), were examined by polarized optical microscopy, scanning electron microscopy, wide‐angle X‐r

Effect of hydrocarbon resin on the morph

Effect of hydrocarbon resin on the morphology and mechanical properties of isotactic polypropylene/clay composites

✍ Sossio Cimmino; Clara Silvestre; Donatella Duraccio; Marilena Pezzuto 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 680 KB

Clay Functionalization and Organization

Clay Functionalization and Organization for Delamination of the Silicate Tactoids in Poly(L-lactide) Matrix

✍ Guang-Xin Chen; Jin-San Yoon 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 301 KB

## Abstract Summary: Three kinds of organoclay, i.e., Cloisite15A® (C15A), Cloisite20A® (C20A), and Cloisite30B® (C30B) were modified with silane to prepare twice functionalized organoclay (TFC). The pristine Cloisite® clays and the TFC were melt compounded with poly(L‐lactide) (PLLA) and morpholog

Effect of the silane modification of an

Effect of the silane modification of an organoclay on the properties of polypropylene/clay composites

✍ Jung Hiuk Joo; Jae Hun Shim; Jae Hoon Choi; Chi-Hoon Choi; Dae-Sik Kim; Jin-San 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 225 KB 👁 3 views

## Abstract A commercial clay, Cloisite®20A (C20A) was modified with three different silane compounds, propyltrimethoxy silane, octyltrimethoxy silane, and octadecyltrimethoxy silane, to control the hydrophobicity of C20A. The amount of the silane compounds grafted to C20A was quantified from the w