๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Production technology and mechanical properties of high-nitrous cast Armco iron

โœ Scribed by V. I. Tkachev; V. I. Vitvitskii; V. I. Koval'chuk; S. A. Grebenyuk; G. N. Grikurov

Publisher
Springer
Year
1994
Tongue
English
Weight
130 KB
Volume
29
Category
Article
ISSN
1573-885X

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Effect of cooling rate on microstructure
Effect of cooling rate on microstructure and mechanical properties of gray cast iron
โœ M.M. Jabbari Behnam; P. Davami; N. Varahram ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 965 KB

This paper presents the results obtained and the deductions made from a series of microstructural studies and mechanical tests involving gray cast iron which was sand cast using a variety of modules. The effect of cooling rate on the primary dendrite arm spacing (DAS), secondary dendrite arm spacing

Mechanical and microstructural propertie
Mechanical and microstructural properties of low-carbon steel-plate-reinforced gray cast iron
โœ Ahmet Avcฤฑ; Nevzat ฤฐlkaya; Mehmet ลžimลŸir; Ahmet Akdemir ๐Ÿ“‚ Article ๐Ÿ“… 2009 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 715 KB

In the present experimental study, strengthening of gray cast iron by reinforcing with steel plates was investigated in the as-cast and normalized conditions. Normalizing heat treatments were applied to the specimens at temperatures of 800 โ€ข C and 850 โ€ข C. Three-point bend specimens were manufacture